Have your eggs always perfectly boiled just as you like them. With this solution that is simple and customizable.
Protect your home from the flood with this simple device. It will send you the notification when there is some leak in a bathroom or kitchen
Monitor your workspace or your home with this simple solution that sends all the data by radio so you can work with them.
Overfreezing you fridge is not good for your food and power saving, with this fridge monitor, you will always know the temperature in there.
I work a lot in my garage or in the garden, so it happens pretty often that I just don't hear my doorbell. So I made a smart one.
Stop the mold from spreading in your house or office with this simple device. Just put it into the moldy room and watch the humidity.
A simple device that turns the lights on when the user approaches home.
Read sensor data and toggle LEDs with the Blynk mobile app and the TI CC3200 LaunchPad
This is a cool IoT project for beginners using NodeMCU and Blynk app. Through this project, you can control 4 devices in your home.
If you have ever wondered how to get started in the IoT (Internet of Things) world, this is the tutorial for you!
With this project, we will be able to water our plant automatically and monitor it from our smartphone.
Control an external LED light from anywhere in the world using the ESP8266. The GPIO pin serves as an output source to the LED.
A smart iot outlet controlled by Google assistant, learn how to connect blynk with ifttt
Monitor the conditions (Hum, Temp, Soil Moisture & Light) in which your plant in growing & take necessary actions from anywhere, anytime.
Making a smart garage model from the toy building using XOD and Blynk.
Burn everything written in the Blynk terminal to an SD card in seconds, anywhere the user is located.
Setup a home temperature monitoring system on your phone within minutes! Literally just copy and paste!
Use a $9 GSM module & the Hologram network to remotely control any Arduino with Blynk App.
Create your Blynk mobile app to monitor your garden and activate the irrigation.
Simply click a button to receive your phone's geolocation.
The easiest way to add WiFi control to your project!
An I2C interface with Blynk.
A simple project to learn IoT by connecting a DHT11 temperature and humidity sensor with WeMos D1 Mini and interfacing the data to Blynk.
A simple Internet of Things experiment, using an Arduino MKR1000 board to control two LEDs and monitor a potentiometer, via Blynk app.