If you want a NodeMCU device that could help you to control all your house electrical devices, then this will be your best guide
Using Arduino UNO GSM SIM800 SIM network to remotely control any Arduino with Blynk app.
Control an on-board LED.
Overfreezing you fridge is not good for your food and power saving, with this fridge monitor, you will always know the temperature in there.
Stop the mold from spreading in your house or office with this simple device. Just put it into the moldy room and watch the humidity.
Connecting an electrical bulb with Arduino Uno and accessing it from Android Phone.
This is a cool IoT project for beginners using NodeMCU and Blynk app. Through this project, you can control 4 devices in your home.
A project that displays the temperature and humidity of a room on your mobile in real time.
A system that warns for unexpected rains to help out your garden. The system displays real time values on mobile.
With this project, we will be able to water our plant automatically and monitor it from our smartphone.
Control an external LED light from anywhere in the world using the ESP8266. The GPIO pin serves as an output source to the LED.
A simple device that turns the lights on when the user approaches home.
Monitor your living room temperature remotely using DHT-11, ESP8266 WiFi module, and Blynk.
A smart iot outlet controlled by Google assistant, learn how to connect blynk with ifttt
Monitor the conditions (Hum, Temp, Soil Moisture & Light) in which your plant in growing & take necessary actions from anywhere, anytime.
Make a simplified table trash bin and can.
Making a smart garage model from the toy building using XOD and Blynk.
Burn everything written in the Blynk terminal to an SD card in seconds, anywhere the user is located.
Adapt your home automation project from our March 2017 workshop to be controlled through BLE using the Blynk app on your phone.
A system that keeps you updated about the happenings of your house in your absence.The display is shown on your mobile.
This project shows how to connect a DHT11 sensor with a NodeMCU and check temperature/humidity.
Get notified on your smartphone/smartwatch when your mail is delivered and when it is collected. New version.
This is a simple project for those who want to make a relay module using one BC547 transistor.
A home automation project for light use with an ESP8266 and 5V relay.