An ultimate tutorial for beginners on how to connect and use an ESP8266 via Arduino and program it to blink an LED using the Blynk app.

Interfacing ultrasonic sensor with NodeMCU and displaying the distance in the Blynk app.

Use a $9 GSM module & the Hologram network to remotely control any Arduino with Blynk App.

Learn how to gain remote control of your DIY constructions with the easy to use Blynk interface.

Here's an introduction to control a Nema 17 stepper motor with the help of the Adafruit TB6612 OR A4988 Stepstick OR PHPoC PES-2405 R2

Your search for a big bedside clock has an end.

Control your LED on Arduino UNO using Blynk App.

Use Blynk to send a command to Onion Omega2 and use virtual pins to write on your console.

Easy way to unlock and Lock door with Blynk app. Also, I will add code for to Lock & Unlock door by RFID and fingerprint sensor. 3 in 1.

At my age you have to get up at night and get tired on the way to the bathroom. Using a PIR-Sensor to trigger light on!

This guide will demonstrate to beginners how to use Arduino 101 BLE (Bluetooth Low Energy) feature to control an LED from an Android mobile.

Don't let your BBC micro:bit collect dust! Here is how to use it with Blynk and Arduino IDE.

Use a LattePanda and Blynk to make a simple but cool IoT control unit.

This walks you through the Blynk boar'd's firmware.

Control your Robot from anywhere using the ARMA IoT shield for UNO and the Blynk App which provides the user interface.

Control an external LED light from anywhere in the world using the ESP8266. The GPIO pin serves as an output source to the LED.

Use the Blynk app to control the RGB LED, the onboard LED, and the LED expansion from your phone.

Display information or variables on a LCD available at BLYNK app using IOT.

This tutorial shows how to monitor temperature and humidity from Magicbit (ESP32) and view it in the Blynk cloud dashboard.

A simple project to display a particular webpage data in blynk app via bluetooth module and using thingspeak platform.

Using Arduino UNO GSM SIM800 SIM network to remotely control any Arduino with Blynk app. Share schematic + gerber file + BomList

How easy is to do the link between my Arduino Yun and one mobile using free soft Blynk.

An example of Blynk app linking the mobile to the Arduino 101 using Bluetooth Low Energy BLE.

The easiest way to add WiFi control to your project!