A small project designed using Node MCU and Blynk app to enable using the Google Assistant to switch on/off home appliances.
Cloud connected, fully automated, smart indoor herb harvesting using Seeed Studio's Wio Terminal and Blynk app.
A simple device that turns the lights on when the user approaches home.
Read sensor data and toggle LEDs with the Blynk mobile app and the TI CC3200 LaunchPad
Simply click a button to receive your phone's geolocation.
Setup a home temperature monitoring system on your phone within minutes! Literally just copy and paste!
With this tutorial, we will learn how to handle this fantastic little device, the NodeMCU ESP-12E and Blynk platform.
Making a smart garage model from the toy building using XOD and Blynk.
This is a cool IoT project for beginners using NodeMCU and Blynk app. Through this project, you can control 4 devices in your home.
Control your robot from a Wi-Fi network using an ESP8266 Wemos D1, Arduino IDE and Blynk App!
We show how to connect Pico to WiFi while maintaining low power and running it directly on AAA batteries.
Create your Blynk mobile app to monitor your garden and activate the irrigation.
In this I show you how to control LEDs using Blynk app In IoT platform.
Burn everything written in the Blynk terminal to an SD card in seconds, anywhere the user is located.
A simple Internet of Things experiment, using an Arduino MKR1000 board to control two LEDs and monitor a potentiometer, via Blynk app.
This is an iot based smart energy meter that I made it can monitor power, current, watt hour and unit energy consumed by the device
Today i show you how to interface DHT sensor Value in Blynk Apps use NodeMcu8266 .
You can easily water your plants using IOT with the Soil moisture sensor
Adjust your blinds from the comfort of your seat without having to go through the effort of standing up.
A smart iot outlet controlled by Google assistant, learn how to connect blynk with ifttt
I work a lot in my garage or in the garden, so it happens pretty often that I just don't hear my doorbell. So I made a smart one.
It is an IOT based door lock system which consists of a NodeMCU board. It is interfaced with a Sg90 which shows open and close of a door lock
Make your own IoT based home/office security system using the Nodemcu ESP8266 Wifi module, PIR Sensor and Blynk application.
In this post we will be going to look how to make your own CCTV using ESP32-CAM board. It will be cost lower than CCTV cameras. You can fix