Control your lighting and other appliances from your smartphone using Blynk app and voice control using google assistant IFTT webhook.
How to Read Multiple Analog Values Using One Analog Pin
A simple home automation project allows you to control home appliance from anywhere. Blynk provides very good and attractive interface.
Hi guys, this is me Rohan Barnwal in this project I teach you how you can create a device which help us in stop spreading of Corona Virus
Hi, my name is Rohan Barnwal welcome back in this project I teach you how you can create a device which help us in stop spreading of Corona
This is an iot based smart energy meter that I made it can monitor power, current, watt hour and unit energy consumed by the device
Hi guys it's me Rohan Barnwal welcome back with another project in this project I teach you how to create notification based door bell
It is an IOT based door lock system which consists of a NodeMCU board. It is interfaced with a Sg90 which shows open and close of a door lock
This Preventive measure reduces the spread of infection to a large extent. A Must Watch!
Build an Android or iOS app for your hardware with no coding!
In this tutorial, we will learn how to interface Servo motor with the Raspberry pi module and operate it with the Blynk app. and This proje
A simple device that turns the lights on when the user approaches home.
Never miss anyone at your door! A system that notifies your phone and email whenever someone presses the doorbell.
In this tutorial, we will learn how to control an Arduino with the help of Blynk App and ESP8266 WiFi Module. This project is quite simple!
Interfacing ultrasonic sensor with NodeMCU and displaying the distance in the Blynk app.
An internet-connected, servo-driven deadbolt actuator that can be operated remotely using a smartphone.
Read sensor data and toggle LEDs with the Blynk mobile app and the TI CC3200 LaunchPad
Automating a chicken coop with sensors and actors, using an Arduino MKR1000 and the Blynk internet dashboard.
My aim is to minimize the loss of electricity there is when people forget to switch off their fans or lights, through smart home solution.
Control your garage door from wherever you are.
An ultimate tutorial for beginners on how to connect and use an ESP8266 via Arduino and program it to blink an LED using the Blynk app.
Use a $9 GSM module & the Hologram network to remotely control any Arduino with Blynk App.
Monitor your living room temperature remotely using DHT-11, ESP8266 WiFi module, and Blynk.
Learn how to gain remote control of your DIY constructions with the easy to use Blynk interface.