A simple device that turns the lights on when the user approaches home.
Read sensor data and toggle LEDs with the Blynk mobile app and the TI CC3200 LaunchPad
With this tutorial, we will learn how to handle this fantastic little device, the NodeMCU ESP-12E and Blynk platform.
Simply click a button to receive your phone's geolocation.
Control your robot from a Wi-Fi network using an ESP8266 Wemos D1, Arduino IDE and Blynk App!
Making a smart garage model from the toy building using XOD and Blynk.
Create your Blynk mobile app to monitor your garden and activate the irrigation.
Adjust your blinds from the comfort of your seat without having to go through the effort of standing up.
In this I show you how to control LEDs using Blynk app In IoT platform.
Burn everything written in the Blynk terminal to an SD card in seconds, anywhere the user is located.
I work a lot in my garage or in the garden, so it happens pretty often that I just don't hear my doorbell. So I made a smart one.
This is a cool IoT project for beginners using NodeMCU and Blynk app. Through this project, you can control 4 devices in your home.
Overfreezing you fridge is not good for your food and power saving, with this fridge monitor, you will always know the temperature in there.
Stop the mold from spreading in your house or office with this simple device. Just put it into the moldy room and watch the humidity.
Protect your home from the flood with this simple device. It will send you the notification when there is some leak in a bathroom or kitchen
Monitor your workspace or your home with this simple solution that sends all the data by radio so you can work with them.
Have your eggs always perfectly boiled just as you like them. With this solution that is simple and customizable.
If you have ever wondered how to get started in the IoT (Internet of Things) world, this is the tutorial for you!
Setup a home temperature monitoring system on your phone within minutes! Literally just copy and paste!
In this post we will be going to look how to make your own CCTV using ESP32-CAM board. It will be cost lower than CCTV cameras. You can fix
Monitor the conditions (Hum, Temp, Soil Moisture & Light) in which your plant in growing & take necessary actions from anywhere, anytime.
Today i show you how to interface DHT sensor Value in Blynk Apps use NodeMcu8266 .
Many projects like this involve requiring a WiFi shield, or a Bluetooth Module. However, thanks to Blynk, all that is still possible.
This project is about an IoT setup for a TV RGB backlight that can be controlled by Blynk App.