If you want a NodeMCU device that could help you to control all your house electrical devices, then this will be your best guide
Control an on-board LED.
This is a cool IoT project for beginners using NodeMCU and Blynk app. Through this project, you can control 4 devices in your home.
A smart iot outlet controlled by Google assistant, learn how to connect blynk with ifttt
Make a simplified table trash bin and can.
Stop the mold from spreading in your house or office with this simple device. Just put it into the moldy room and watch the humidity.
Overfreezing you fridge is not good for your food and power saving, with this fridge monitor, you will always know the temperature in there.
Making a smart garage model from the toy building using XOD and Blynk.
This project shows how to connect a DHT11 sensor with a NodeMCU and check temperature/humidity.
This is a simple project for those who want to make a relay module using one BC547 transistor.
A home automation project for light use with an ESP8266 and 5V relay.
In this tutorial, we will learn how to control an Arduino with the help of Blynk App and ESP8266 WiFi Module. This project is quite simple!
In this I show you how to control LEDs using Blynk app In IoT platform.
Monitor the conditions (Hum, Temp, Soil Moisture & Light) in which your plant in growing & take necessary actions from anywhere, anytime.
A simple device that turns the lights on when the user approaches home.
Burn everything written in the Blynk terminal to an SD card in seconds, anywhere the user is located.
By using your phone you can make is so that you can change your temperature of your old stick thermostat from anywhere.
It is a lamp or desk lamp that is controlled by your phone for when you need the light to get to your bed, but not once you are in bed.
Adjust your blinds from the comfort of your seat without having to go through the effort of standing up.
This project was part of the Lane Tech HS Physical Computing Lab course. I created this project as part of the Home Automation / IoT project
Tired of manually moving your movies and TV shows between devices? now you don't have to!
Where did I leave my phone? Push a Button and an email will be sent giving you the Geolocation of your phone.
Adapt your home automation project from our March 2017 workshop to be controlled through BLE using the Blynk app on your phone.
When you are out of your home for Christmas Holiday you can visualize the Temp and Humidity values by your smartwatch using ArduinoMKR1000.