This is a short tutorial for connecting and setting up the MH-Z14A carbon dioxide sensor in Arduino w/OTA updates and Blynk.

Using Arduino UNO GSM SIM800 SIM network to remotely control any Arduino with Blynk app.

Control an on-board LED.

This is a cool IoT project for beginners using NodeMCU and Blynk app. Through this project, you can control 4 devices in your home.

If you have ever wondered how to get started in the IoT (Internet of Things) world, this is the tutorial for you!

With this project, we will be able to water our plant automatically and monitor it from our smartphone.

Control an external LED light from anywhere in the world using the ESP8266. The GPIO pin serves as an output source to the LED.

A smart iot outlet controlled by Google assistant, learn how to connect blynk with ifttt

An ultimate tutorial for beginners on how to connect and use an ESP8266 via Arduino and program it to blink an LED using the Blynk app.

Make a simplified table trash bin and can.

Stop the mold from spreading in your house or office with this simple device. Just put it into the moldy room and watch the humidity.

Overfreezing you fridge is not good for your food and power saving, with this fridge monitor, you will always know the temperature in there.

Monitor your workspace or your home with this simple solution that sends all the data by radio so you can work with them.

Protect your home from the flood with this simple device. It will send you the notification when there is some leak in a bathroom or kitchen

Have your eggs always perfectly boiled just as you like them. With this solution that is simple and customizable.

Domotic unit to control temperature, humidity and time inside a greenhouse.

I wanted to make a robot. However, I could only make a foot because my money ran out.

Setup a home temperature monitoring system on your phone within minutes! Literally just copy and paste!

CaRo is a cable robot that enables easy and cost-effective entry into programming and robotics.

The easiest way to add WiFi control to your project!

A simple project to learn IoT by connecting a DHT11 temperature and humidity sensor with WeMos D1 Mini and interfacing the data to Blynk.

I made a remote notepad with an ePaper display and Blynk.

Using Google Assistant and Amazon Alexa, we can control our home's electronics gadgets (up to 240 v). Also with smartphone application.

Making a smart garage model from the toy building using XOD and Blynk.