In this tutorial, we will learn how to control an Arduino with the help of Blynk App and ESP8266 WiFi Module. This project is quite simple!
Build an Android or iOS app for your hardware with no coding!
This project shows how to connect a DHT11 sensor with a NodeMCU and check temperature/humidity.
An internet-connected, servo-driven deadbolt actuator that can be operated remotely using a smartphone.
Protect your valuables with a puzzle!
A simple device that turns the lights on when the user approaches home.
Simplest wifi car controlled by your smartphone using NodeMcu esp8266 and Blynk.
Every time a movement is detected by the sensor, a message is sent to a smartphone anywhere in the world!
This is a cool IoT project for beginners using NodeMCU and Blynk app. Through this project, you can control 4 devices in your home.
Create your Blynk mobile app to monitor your garden and activate the irrigation.
My aim is to minimize the loss of electricity there is when people forget to switch off their fans or lights, through smart home solution.
We will learn how to capture temperature data, upload it to internet with a NodeMCU and monitor it on a Smart device using a Blynk app.
Connecting an electrical bulb with Arduino Uno and accessing it from Android Phone.
Intel Arduino 101-based tank using Bluetooth Low Energy to communicate with a Blynk remote control on your phone.
A home automation project for light use with an ESP8266 and 5V relay.
Build a beautiful Holiday Shadow Theater and control the animated scene with your phone.
In this I show you how to control LEDs using Blynk app In IoT platform.
Here is how to make an Arduino/Genuino 101 Bluetooth Low Energy thermometer with TMP102 and Blynk.
Control your garage door from wherever you are.
Collecting multiple data from multiple sensors connected to the same 1-wire bus and monitoring them from the internet with Blynk.
The best way to NodeMCU GPS tracker Blynk app In IOT platform.
Setup a home temperature monitoring system on your phone within minutes! Literally just copy and paste!
Simply click a button to receive your phone's geolocation.
Read sensor data and toggle LEDs with the Blynk mobile app and the TI CC3200 LaunchPad