Interfacing ultrasonic sensor with NodeMCU and displaying the distance in the Blynk app.
An ultimate tutorial for beginners on how to connect and use an ESP8266 via Arduino and program it to blink an LED using the Blynk app.
Control your Robot from anywhere using the ARMA IoT shield for UNO and the Blynk App which provides the user interface.
Here's an introduction to control a Nema 17 stepper motor with the help of the Adafruit TB6612 OR A4988 Stepstick OR PHPoC PES-2405 R2
Learn how to gain remote control of your DIY constructions with the easy to use Blynk interface.
Control your LED on Arduino UNO using Blynk App.
Use a $9 GSM module & the Hologram network to remotely control any Arduino with Blynk App.
Use the Blynk app to control the RGB LED, the onboard LED, and the LED expansion from your phone.
Control an external LED light from anywhere in the world using the ESP8266. The GPIO pin serves as an output source to the LED.
This guide will demonstrate to beginners how to use Arduino 101 BLE (Bluetooth Low Energy) feature to control an LED from an Android mobile.
How easy is to do the link between my Arduino Yun and one mobile using free soft Blynk.
Display information or variables on a LCD available at BLYNK app using IOT.
A simple project to display a particular webpage data in blynk app via bluetooth module and using thingspeak platform.
An example of Blynk app linking the mobile to the Arduino 101 using Bluetooth Low Energy BLE.
Use a LattePanda and Blynk to make a simple but cool IoT control unit.
Temboo is very easy to automate the IoT with Arduno YUN, in combination with Blynk and Dropbox to store pictures. All is free and easy.
This walks you through the Blynk boar'd's firmware.
A water-resistant temperature sensor is suitable to signal the reaching of the core temperature of the meat during the grilling time.
Easy way to unlock and Lock door with Blynk app. Also, I will add code for to Lock & Unlock door by RFID and fingerprint sensor. 3 in 1.
Don't let your BBC micro:bit collect dust! Here is how to use it with Blynk and Arduino IDE.
Use Blynk to send a command to Onion Omega2 and use virtual pins to write on your console.
Your search for a big bedside clock has an end.
At my age you have to get up at night and get tired on the way to the bathroom. Using a PIR-Sensor to trigger light on!
This contribution is intended for all men who are supposed to bring the paper waste out of their 3rd floor apartment.