Build an Android or iOS app for your hardware with no coding!
Create your Blynk mobile app to monitor your garden and activate the irrigation.
Every time a movement is detected by the sensor, a message is sent to a smartphone anywhere in the world!
A system that warns for unexpected rains to help out your garden. The system displays real time values on mobile.
Collecting multiple data from multiple sensors connected to the same 1-wire bus and monitoring them from the internet with Blynk.
This is a short tutorial for connecting and setting up the MH-Z14A carbon dioxide sensor in Arduino w/OTA updates and Blynk.
We show how to connect Pico to WiFi while maintaining low power and running it directly on AAA batteries.
Display sensor values (DHT11 in example) on the Smartphone using Blynk App.
Monitor your blood oxygen level with this ESP32 based Oximeter. This Oximeter costs less than 10$.
In this easy project we'll connect a temperature and humidity sensor to an Arduino Uno with an Ethernet Shield and we'll use Blynk.
Make your own IoT based home/office security system using the Nodemcu ESP8266 Wifi module, PIR Sensor and Blynk application.
Fidget Spinners are everywhere - one of the challenges is to get the fastest spinning and longest running Spinner...build a sensor!
With this project, we will be able to water our plant automatically and monitor it from our smartphone.
The robot car is operating with Nodemcu esp32 controller and the command is given by the Blynk android application in a mobile phone using t
In this tutorial you will learn how to set up a weather station based on ESP32, and how to monitor its readings remotely, via the Blynk app.
Monitor the conditions (Hum, Temp, Soil Moisture & Light) in which your plant in growing & take necessary actions from anywhere, anytime.
Micro Gear Motor based small robot powered by a Wemos D32 Pro and controlled by Blynk app.
If you have ever wondered how to get started in the IoT (Internet of Things) world, this is the tutorial for you!
We are going to build a simple IoT dog feeder that costs less than $30 and can be controlled remotely via an IoT software!
Smart parking using blynk
In this project, I'm using a Kortex A1 IoT-sensor microcontroller in order to monitor temperature/humidity/pressure/altitude via WiFi.
Use Particle Argons, Blynk IoT app, and a motion sensor to activate and change colors of an LED light strip.
Measurement of Soil Moisture Levels with an automatic Irrigation System integrated in Blynk IOT
That is a coding