In this tutorial, we will learn how to control an Arduino with the help of Blynk App and ESP8266 WiFi Module. This project is quite simple!
This project shows how to connect a DHT11 sensor with a NodeMCU and check temperature/humidity.
A project that displays the temperature and humidity of a room on your mobile in real time.
A simple device that turns the lights on when the user approaches home.
Every time a movement is detected by the sensor, a message is sent to a smartphone anywhere in the world!
This is a cool IoT project for beginners using NodeMCU and Blynk app. Through this project, you can control 4 devices in your home.
Monitor your living room temperature remotely using DHT-11, ESP8266 WiFi module, and Blynk.
Connecting an electrical bulb with Arduino Uno and accessing it from Android Phone.
Control an external LED light from anywhere in the world using the ESP8266. The GPIO pin serves as an output source to the LED.
Control and monitor your Arduino porject using your only a smartphone and an internet connection!
A home automation project for light use with an ESP8266 and 5V relay.
In this I show you how to control LEDs using Blynk app In IoT platform.
A system that warns for unexpected rains to help out your garden. The system displays real time values on mobile.
Making a smart garage model from the toy building using XOD and Blynk.
Make a simplified table trash bin and can.
Control an on-board LED.
Get notified on your smartphone/smartwatch when your mail is delivered and when it is collected. New version.
Wanted to replace the standard remote control unit for a garage door with an app on my iPhone.
Get an extractor fan to automatically turn on when the humidity in the bathroom exceeded a certain level and then turn off again.
Burn everything written in the Blynk terminal to an SD card in seconds, anywhere the user is located.
A system that keeps you updated about the happenings of your house in your absence.The display is shown on your mobile.
Display information or variables on a LCD available at BLYNK app using IOT.
How to make a smart greenhouse using Arduino and Node MCU for IoT
With this project, we will be able to water our plant automatically and monitor it from our smartphone.