Micro Gear Motor based small robot powered by a Wemos D32 Pro and controlled by Blynk app.

Monitor your blood oxygen level with this ESP32 based Oximeter. This Oximeter costs less than 10$.

That is a coding

In this easy project we'll connect a temperature and humidity sensor to an Arduino Uno with an Ethernet Shield and we'll use Blynk.

Easy ways to build HCSR With BLYNK

Smart parking using blynk

In this tutorial you will learn how to set up a weather station based on ESP32, and how to monitor its readings remotely, via the Blynk app.

Fun activity for students - set up your weather station, sent it up in the air, and monitor the recordings!

This is a short tutorial for connecting and setting up the MH-Z14A carbon dioxide sensor in Arduino w/OTA updates and Blynk.

Build an Android or iOS app for your hardware with no coding!

A system that warns for unexpected rains to help out your garden. The system displays real time values on mobile.

If you have ever wondered how to get started in the IoT (Internet of Things) world, this is the tutorial for you!

With this project, we will be able to water our plant automatically and monitor it from our smartphone.

Create your Blynk mobile app to monitor your garden and activate the irrigation.

In this project, I'm using a Kortex A1 IoT-sensor microcontroller in order to monitor temperature/humidity/pressure/altitude via WiFi.

Collecting multiple data from multiple sensors connected to the same 1-wire bus and monitoring them from the internet with Blynk.

Fidget Spinners are everywhere - one of the challenges is to get the fastest spinning and longest running Spinner...build a sensor!

Every time a movement is detected by the sensor, a message is sent to a smartphone anywhere in the world!

Display sensor values (DHT11 in example) on the Smartphone using Blynk App.