A simple device that turns the lights on when the user approaches home.
Control your Robot from anywhere using the ARMA IoT shield for UNO and the Blynk App which provides the user interface.
Read sensor data and toggle LEDs with the Blynk mobile app and the TI CC3200 LaunchPad
Simply click a button to receive your phone's geolocation.
With this tutorial, we will learn how to handle this fantastic little device, the NodeMCU ESP-12E and Blynk platform.
Making a smart garage model from the toy building using XOD and Blynk.
Control your robot from a Wi-Fi network using an ESP8266 Wemos D1, Arduino IDE and Blynk App!
Use a $9 GSM module & the Hologram network to remotely control any Arduino with Blynk App.
Create your Blynk mobile app to monitor your garden and activate the irrigation.
Adjust your blinds from the comfort of your seat without having to go through the effort of standing up.
This is a cool IoT project for beginners using NodeMCU and Blynk app. Through this project, you can control 4 devices in your home.
Control an external LED light from anywhere in the world using the ESP8266. The GPIO pin serves as an output source to the LED.
Cloud connected, fully automated, smart indoor herb harvesting using Seeed Studio's Wio Terminal and Blynk app.
In this I show you how to control LEDs using Blynk app In IoT platform.
Burn everything written in the Blynk terminal to an SD card in seconds, anywhere the user is located.
I work a lot in my garage or in the garden, so it happens pretty often that I just don't hear my doorbell. So I made a smart one.
With this project, we will be able to water our plant automatically and monitor it from our smartphone.
Overfreezing you fridge is not good for your food and power saving, with this fridge monitor, you will always know the temperature in there.
Stop the mold from spreading in your house or office with this simple device. Just put it into the moldy room and watch the humidity.
Monitor your workspace or your home with this simple solution that sends all the data by radio so you can work with them.
An I2C interface with Blynk.
In this post we will be going to look how to make your own CCTV using ESP32-CAM board. It will be cost lower than CCTV cameras. You can fix
Have your eggs always perfectly boiled just as you like them. With this solution that is simple and customizable.
This project was part of the Lane Tech HS Physical Computing Lab course. I created this project as part of the Home Automation/IoT project.