A project that displays the temperature and humidity of a room on your mobile in real time.
In this tutorial, we will learn how to control an Arduino with the help of Blynk App and ESP8266 WiFi Module. This project is quite simple!
A simple device that turns the lights on when the user approaches home.
Every time a movement is detected by the sensor, a message is sent to a smartphone anywhere in the world!
Control and monitor your Arduino porject using your only a smartphone and an internet connection!
Connecting an electrical bulb with Arduino Uno and accessing it from Android Phone.
A system that warns for unexpected rains to help out your garden. The system displays real time values on mobile.
Making a smart garage model from the toy building using XOD and Blynk.
A home automation project for light use with an ESP8266 and 5V relay.
Adjust your blinds from the comfort of your seat without having to go through the effort of standing up.
If you want a NodeMCU device that could help you to control all your house electrical devices, then this will be your best guide
Monitor your living room temperature remotely using DHT-11, ESP8266 WiFi module, and Blynk.
This project shows how to connect a DHT11 sensor with a NodeMCU and check temperature/humidity.
In this I show you how to control LEDs using Blynk app In IoT platform.
Get an extractor fan to automatically turn on when the humidity in the bathroom exceeded a certain level and then turn off again.
Burn everything written in the Blynk terminal to an SD card in seconds, anywhere the user is located.
I made LED EyeBall controlled by Blynk using Adafruit Feather 32u4 Bluefruit LE. I can easily using Blynk!!
I work a lot in my garage or in the garden, so it happens pretty often that I just don't hear my doorbell. So I made a smart one.
Get notified on your smartphone/smartwatch when your mail is delivered and when it is collected. New version.
Overfreezing you fridge is not good for your food and power saving, with this fridge monitor, you will always know the temperature in there.
Control an external LED light from anywhere in the world using the ESP8266. The GPIO pin serves as an output source to the LED.
Stop the mold from spreading in your house or office with this simple device. Just put it into the moldy room and watch the humidity.
With this project, we will be able to water our plant automatically and monitor it from our smartphone.
This is a cool IoT project for beginners using NodeMCU and Blynk app. Through this project, you can control 4 devices in your home.