We are going to build a simple IoT dog feeder that costs less than $30 and can be controlled remotely via an IoT software!
Measurement of Soil Moisture Levels with an automatic Irrigation System integrated in Blynk IOT
We show how to connect Pico to WiFi while maintaining low power and running it directly on AAA batteries.
Monitor your blood oxygen level with this ESP32 based Oximeter. This Oximeter costs less than 10$.
The robot car is operating with Nodemcu esp32 controller and the command is given by the Blynk android application in a mobile phone using t
Micro Gear Motor based small robot powered by a Wemos D32 Pro and controlled by Blynk app.
Use Particle Argons, Blynk IoT app, and a motion sensor to activate and change colors of an LED light strip.
In this easy project we'll connect a temperature and humidity sensor to an Arduino Uno with an Ethernet Shield and we'll use Blynk.
Easy ways to build HCSR With BLYNK
Smart parking using blynk
Make your own IoT based home/office security system using the Nodemcu ESP8266 Wifi module, PIR Sensor and Blynk application.
Fun activity for students - set up your weather station, sent it up in the air, and monitor the recordings!
In this tutorial you will learn how to set up a weather station based on ESP32, and how to monitor its readings remotely, via the Blynk app.
This is a short tutorial for connecting and setting up the MH-Z14A carbon dioxide sensor in Arduino w/OTA updates and Blynk.
If you have ever wondered how to get started in the IoT (Internet of Things) world, this is the tutorial for you!
Monitor the conditions (Hum, Temp, Soil Moisture & Light) in which your plant in growing & take necessary actions from anywhere, anytime.
Create your Blynk mobile app to monitor your garden and activate the irrigation.
Collecting multiple data from multiple sensors connected to the same 1-wire bus and monitoring them from the internet with Blynk.
Every time a movement is detected by the sensor, a message is sent to a smartphone anywhere in the world!
Display sensor values (DHT11 in example) on the Smartphone using Blynk App.
Build an Android or iOS app for your hardware with no coding!