Changing the world, one gas station at a time!

A car that can be controlled from anywhere in the world over the internet.

Home automation using NodeMCU and Blynk App

This is a project about a robot made for people who feel lonely.

The robot car is operating with Nodemcu esp32 controller and the command is given by the Blynk android application in a mobile phone using t

Micro Gear Motor based small robot powered by a Wemos D32 Pro and controlled by Blynk app.

Remotely control a spiderbot using your phone with feedback from a US sensor.

Simple and full instruction for the beginner!

In this video I'm gong to show you how to make Esp8266 based IOT Car using your blynk IOT cloud platform

For now, you can control Servo with Blynk.

How to Read Multiple Analog Values Using One Analog Pin

A simple home automation project allows you to control home appliance from anywhere. Blynk provides very good and attractive interface.

This is an iot based smart energy meter that I made it can monitor power, current, watt hour and unit energy consumed by the device

Hi guys it's me Rohan Barnwal welcome back with another project in this project I demonstrate you how to create notification based door bell

This Preventive measure reduces the spread of infection to a large extent. A Must Watch!

You can easily water your plants using IOT with the Soil moisture sensor

I created a raspberry pi remote-controlled car using Blynk.

Human detection Security System Using IOT

Through this tutorial I made fire alarm notification System Using Iot technology. wherever you are in the world you can get the notification

If you want a NodeMCU device that could help you to control all your house electrical devices, then this will be your best guide

Control an external LED light from anywhere in the world using the ESP8266. The GPIO pin serves as an output source to the LED.

A smart iot outlet controlled by Google assistant, learn how to connect blynk with ifttt

An ultimate tutorial for beginners on how to connect and use an ESP8266 via Arduino and program it to blink an LED using the Blynk app.

I wanted to make a robot. However, I could only make a foot because my money ran out.