The best safety equipment for your Mother or Wife. A Must Watch!
This project is about an IoT setup for a TV RGB backlight that can be controlled by Blynk App.
Weather station that display temperature, humidity and pressure on your Android phone with Blynk IoT server.
Home Automation NodeMcu ESP8266 | Arduino | Smartphone Controlled
You can easily water your plants using IOT with the Soil moisture sensor
This tutorial is about making a Smart Plug with ESP8266 & Blynk for anything you want to turn on or off automatically.
This tutorial is about making a temperature and humidity wifi node with Blynk.
Using UIFlow and Blynk to complete the interaction experiment
Make your own IoT based home/office security system using the Nodemcu ESP8266 Wifi module, PIR Sensor and Blynk application.
You can control your home light or any appliances from anywhere and anyplace
I created a raspberry pi remote-controlled car using Blynk.
Human detection Security System Using IOT
Through this tutorial I made fire alarm notification System Using Iot technology. wherever you are in the world you can get the notification
Fun activity for students - set up your weather station, sent it up in the air, and monitor the recordings!
In this tutorial you will learn how to set up a weather station based on ESP32, and how to monitor its readings remotely, via the Blynk app.
Have your eggs always perfectly boiled just as you like them. With this solution that is simple and customizable.
Protect your home from the flood with this simple device. It will send you the notification when there is some leak in a bathroom or kitchen
Monitor your workspace or your home with this simple solution that sends all the data by radio so you can work with them.
Overfreezing you fridge is not good for your food and power saving, with this fridge monitor, you will always know the temperature in there.
Stop the mold from spreading in your house or office with this simple device. Just put it into the moldy room and watch the humidity.
I work a lot in my garage or in the garden, so it happens pretty often that I just don't hear my doorbell. So I made a smart one.
This project is a wireless drone that can be controlled using the Blynk app on your phone. It has an autonomous mode that avoids objects.
If you want a NodeMCU device that could help you to control all your house electrical devices, then this will be your best guide
This is a short tutorial for connecting and setting up the MH-Z14A carbon dioxide sensor in Arduino w/OTA updates and Blynk.