This is a cool IoT project for beginners using NodeMCU and Blynk app. Through this project, you can control 4 devices in your home.
A simple device that turns the lights on when the user approaches home.
Control your Robot from anywhere using the ARMA IoT shield for UNO and the Blynk App which provides the user interface.
Create your Blynk mobile app to monitor your garden and activate the irrigation.
A simple project to learn IoT by connecting a DHT11 temperature and humidity sensor with WeMos D1 Mini and interfacing the data to Blynk.
Control an external LED light from anywhere in the world using the ESP8266. The GPIO pin serves as an output source to the LED.
In this I show you how to control LEDs using Blynk app In IoT platform.
Setup a home temperature monitoring system on your phone within minutes! Literally just copy and paste!
Use a $9 GSM module & the Hologram network to remotely control any Arduino with Blynk App.
Making a smart garage model from the toy building using XOD and Blynk.
Simply click a button to receive your phone's geolocation.
It is an IOT based door lock system which consists of a NodeMCU board. It is interfaced with a Sg90 which shows open and close of a door lock
We show how to connect Pico to WiFi while maintaining low power and running it directly on AAA batteries.
Lock your door from anywhere
Control your robot from a Wi-Fi network using an ESP8266 Wemos D1, Arduino IDE and Blynk App!
Read sensor data and toggle LEDs with the Blynk mobile app and the TI CC3200 LaunchPad
An I2C interface with Blynk.
Really? A pitch? What is this?
This is an iot based smart energy meter that I made it can monitor power, current, watt hour and unit energy consumed by the device
Make your own IoT based home/office security system using the Nodemcu ESP8266 Wifi module, PIR Sensor and Blynk application.
Read temperature, humidity and air quality control using DHT22 and MQ - 135 and monitoring with Blynk using ESP8266.
With this tutorial, we will learn how to handle this fantastic little device, the NodeMCU ESP-12E and Blynk platform.
Burn everything written in the Blynk terminal to an SD card in seconds, anywhere the user is located.
You can easily water your plants using IOT with the Soil moisture sensor