In this tutorial, we will learn how to control an Arduino with the help of Blynk App and ESP8266 WiFi Module. This project is quite simple!
A project that displays the temperature and humidity of a room on your mobile in real time.
This project shows how to connect a DHT11 sensor with a NodeMCU and check temperature/humidity.
A simple device that turns the lights on when the user approaches home.
Every time a movement is detected by the sensor, a message is sent to a smartphone anywhere in the world!
Control and monitor your Arduino porject using your only a smartphone and an internet connection!
Connecting an electrical bulb with Arduino Uno and accessing it from Android Phone.
A system that warns for unexpected rains to help out your garden. The system displays real time values on mobile.
A home automation project for light use with an ESP8266 and 5V relay.
In this I show you how to control LEDs using Blynk app In IoT platform.
Monitor your living room temperature remotely using DHT-11, ESP8266 WiFi module, and Blynk.
Making a smart garage model from the toy building using XOD and Blynk.
Get notified on your smartphone/smartwatch when your mail is delivered and when it is collected. New version.
Wanted to replace the standard remote control unit for a garage door with an app on my iPhone.
Burn everything written in the Blynk terminal to an SD card in seconds, anywhere the user is located.
A system that keeps you updated about the happenings of your house in your absence.The display is shown on your mobile.
Get an extractor fan to automatically turn on when the humidity in the bathroom exceeded a certain level and then turn off again.
Adjust your blinds from the comfort of your seat without having to go through the effort of standing up.
This is a cool IoT project for beginners using NodeMCU and Blynk app. Through this project, you can control 4 devices in your home.
Display information or variables on a LCD available at BLYNK app using IOT.
When you are out of your home for Christmas Holiday you can visualize the Temp and Humidity values by your smartwatch using ArduinoMKR1000.
Make a simplified table trash bin and can.
I made LED EyeBall controlled by Blynk using Adafruit Feather 32u4 Bluefruit LE. I can easily using Blynk!!
Control an external LED light from anywhere in the world using the ESP8266. The GPIO pin serves as an output source to the LED.