An ultimate tutorial for beginners on how to connect and use an ESP8266 via Arduino and program it to blink an LED using the Blynk app.
Control an external LED light from anywhere in the world using the ESP8266. The GPIO pin serves as an output source to the LED.
Control your robot from a Wi-Fi network using an ESP8266 Wemos D1, Arduino IDE and Blynk App!
If you want a NodeMCU device that could help you to control all your house electrical devices, then this will be your best guide
This is a very simple project, were the main idea is to explore how to control servos via internet using NodeMCU and Blynk.
A smart iot outlet controlled by Google assistant, learn how to connect blynk with ifttt
This is an iot based smart energy meter that I made it can monitor power, current, watt hour and unit energy consumed by the device
You can easily water your plants using IOT with the Soil moisture sensor
Through this tutorial I made fire alarm notification System Using Iot technology. wherever you are in the world you can get the notification
A simple home automation project allows you to control home appliance from anywhere. Blynk provides very good and attractive interface.
I created a raspberry pi remote-controlled car using Blynk.
Yulee Rover is an Arduino Uno powered robot.
Human detection Security System Using IOT
CaRo is a cable robot that enables easy and cost-effective entry into programming and robotics.
I wanted to make a robot. However, I could only make a foot because my money ran out.
Home Automation NodeMcu ESP8266 | Arduino | Smartphone Controlled
Simple and full instruction for the beginner!
This Preventive measure reduces the spread of infection to a large extent. A Must Watch!
Micro Gear Motor based small robot powered by a Wemos D32 Pro and controlled by Blynk app.
In this video I'm gong to show you how to make Esp8266 based IOT Car using your blynk IOT cloud platform
Hi guys it's me Rohan Barnwal welcome back with another project in this project I teach you how to create notification based door bell
The robot car is operating with Nodemcu esp32 controller and the command is given by the Blynk android application in a mobile phone using t
How to Read Multiple Analog Values Using One Analog Pin
Hi, my name is Rohan Barnwal welcome back in this project I teach you how you can create a device which help us in stop spreading of Corona