We use an Arduino to build an autonomous "follow me" cooler that connects to a smartphone via Bluetooth and uses GPS to navigate.
A smartwatch with fall and location detection, reminders and more, designed to help you or your loved one with Alzheimer's!
Concerned about IoT privacy on the cloud? Blynk offers an interesting option for improved security with a local server.
Octopod, a uniquely shaped full automation system that allows you to monitor your industry and keep security with AI and smart RFID locks.
A project that speaks on behalf of mother nature. It is real time air quality monitoring device.
IoT-based project to control an indoor garden, monitor them remotely, and use the data for future analysis.
How can scientists model and predict the formation of sink holes using IoT?
7 IoT platforms (Yeelink, Wechat, ThingSpeak, Temboo, Blynk, DeviceHub and IFTTT) with Arduino Yun to control home appliance
This system identifies footballer's skills, performance & moves that are difficult to identify during play or training.
Very reliable (multiple mice-live catch) mouse trap. Mice *cannot* escape if they trigger the IR beam! **NEW*: IoT version with phone app!
ADITI is a connected bodysuit heating enabled incubator for preterm infants measuring ECG, Heart Rate, SpO2, Temp & Respiration comfortably.
Automate your curtains and add safety to your room, using the Arduino 101, WIZ750SR and Blynk, along with sensors and actuators!
An outdoor rover, capable of autonomous navigation (using GPS and sonar sensors) or controlled over WiFi.
How to control Hubsan X4 from Android or iOS, easily!
A home automation and Internet of Things project using Arduino Mega 2560 and ESP32.
Blynk app allows selection of a desired temperature. A space heater turns on once actual temperature drops below desired temperature.
This is a robot who can see, listen, talk, and move freely to help us do many activities, much like a friend.
This WiFi module makes it convenient for the user to switch between two audio sources without the need to swap and insert the audio cables.
In this project, I am going to demonstrate how you can make your own ON AIR station with the help of the idIoTware shield.
Monitor pressure, humidity, and temperature over WiFi with an AA battery-sized device.
Using PSoC and LinkIt ONE send analog sensor values to Blynk and then, with the power of IFTTT control your smart devices based on the data!
No Blynk libraries for Bluz? No problem!
Check in on a loved one instantly and have fun!
Replace traditional radio control gear in a 3D Sets 3D-printed Jeep with a Wemos D1 mini, Blynk WiFi iPhone and Blynk local server-Rasp Pi.