In this article, we will introduce you to controlling real world devices using the Blynk system.
I tried communicating between Wi-Fi devices using Blynk's Bridge widget!
Dealing with ill people or elderly at your home? No problem, here's the solution.
This system identifies footballer's skills, performance & moves that are difficult to identify during play or training.
The Waternator 293 is a simple device that regulates the water level in your Christmas tree base.
Converting a common RC car to a Bluetooth car, using an Arduino 101 & controlling with a smartphone via Blynk app.
Adapt your home automation project from our March 2017 workshop to be controlled through BLE using the Blynk app on your phone.
Analyse concrete, metal, wood structures for bends and angles and alerts if they have deviated from the original position.
ADITI is a connected bodysuit heating enabled incubator for preterm infants measuring ECG, Heart Rate, SpO2, Temp & Respiration comfortably.
An opensource 3D printed aquarium controller with IOT capabilities.
This project demonstrates how to use the various features of Blynk like Buttons, LED, LCD, Virtual Display with Onion Omega2p.
Control your favourite guitar effect using nothing but awesome guitar poses.
A DHT11 connected to Blynk to read data
Getting Started Guide for using Blynk with the Arduino IDE for controlling a small robot chassis using a Bluetooth phone or tablet.
Using PSoC and LinkIt ONE send analog sensor values to Blynk and then, with the power of IFTTT control your smart devices based on the data!
This system sends alerts to your smartphone when there is movement in the house, also allows monitoring the temperature of the place.
Controlling water and heat of a plantation, using real data as temperature, relative air humidity, and soil moisture.
Use your Android/IoS phone or tablet to control your hardware remotely with the thingSoC ESP32 board.
Mars Rover that uses Arduino 101 for brains, BLE for communication, and the Blynk app for remote control.
I modified a Blynk-controlled car using Adafruit Feather 32u4 Bluefruit LE. I used the Accelerometer widget of Blynk.
This project is dedicated to my parents, but you can also use it for surprise events for someone special.
When you are out of your home for Christmas Holiday you can visualize the Temp and Humidity values by your smartwatch using ArduinoMKR1000.
A system that allows you to detect movement, send alert through your smartphone and turn on and off the lights of your home over internet!
5 DOF robotic arm using an Arduino Yun, Blynk app as the control interface and Matlab to implement the forward kinematics.