An I2C interface with Blynk.
Mars Rover that uses Arduino 101 for brains, BLE for communication, and the Blynk app for remote control.
An opensource 3D printed aquarium controller with IOT capabilities.
Be the master, control everything with your smart phone.
A simple 4 channel design/program for monitoring orchid and plant moisture levels.
How to control Hubsan X4 from Android or iOS, easily!
Burn everything written in the Blynk terminal to an SD card in seconds, anywhere the user is located.
Controlling a robot via WiFi, using Arduino and Blynk application.
Monitor real power, voltage, current and power factor using the Sparkfun Blynk board and view live graphs in the Blynk App.
In this project, we're going to make a keyless door lock system that uses a 4X4 keypad to enter the keys and a servo motor to open or close.
Control your Home Lights using the Twitter platform.
The Waternator 293 is a simple device that regulates the water level in your Christmas tree base.
Read temperature, humidity and air quality control using DHT22 and MQ - 135 and monitoring with Blynk using ESP8266.
Add some sound FX to your electric fireplace!
Use the Blynk app to control the RGB LED, the onboard LED, and the LED expansion from your phone.
Particle Photon circuit allowing the display of environmental conditions (light, temperature, humidity, pressure) using the Blynk app.
Use your Android/IoS phone or tablet to control your hardware remotely with the thingSoC ESP32 board.
The idea is to upgrade my rover to be controlled by a Blynk app in my mobile. The Blynk is talking to my Arduino UNO using Bluetooth HC06.
I made remote control car. The motors are controlled by smartphone application Blynk and Pi Zero W with the I2C input motor driver.
Really? A pitch? What is this?
A few months back, I posted a tutorial on an Arduino-based weather station, in which I displayed the humidity...
In this article, we will introduce you to controlling real world devices using the Blynk system.
LM35 data or temperature can be shown on phone from anywhere. An Example of how can we read data through the virtual pin.
In this tutorial we're going to learn how to use Blynk app & Arduino in order to control a lamp; the combination will be through USB serial.