Be the master, control everything with your smart phone.
In this simple tutorial, we will explore how to control a servo motor over the internet, using a smartphone.
Getting started with Blynk Bridge - the simplest method to communicate between ESP8266, Arduino or Raspberry Pi.
An I2C interface with Blynk.
How to control Hubsan X4 from Android or iOS, easily!
The best way to NodeMCU GPS tracker Blynk app In IOT platform.
A four-legged robot on roller skates.
An opensource 3D printed aquarium controller with IOT capabilities.
This system identifies footballer's skills, performance & moves that are difficult to identify during play or training.
Mars Rover that uses Arduino 101 for brains, BLE for communication, and the Blynk app for remote control.
A simple 4 channel design/program for monitoring orchid and plant moisture levels.
Burn everything written in the Blynk terminal to an SD card in seconds, anywhere the user is located.
Monitor real power, voltage, current and power factor using the Sparkfun Blynk board and view live graphs in the Blynk App.
Control your Home Lights using the Twitter platform.
Add some sound FX to your electric fireplace!
A simple project to learn IoT by connecting a DHT11 temperature and humidity sensor with WeMos D1 Mini and interfacing the data to Blynk.
Particle Photon circuit allowing the display of environmental conditions (light, temperature, humidity, pressure) using the Blynk app.
Use the Blynk app to control the RGB LED, the onboard LED, and the LED expansion from your phone.
Controlling a robot via WiFi, using Arduino and Blynk application.
The Waternator 293 is a simple device that regulates the water level in your Christmas tree base.
Use your Android/IoS phone or tablet to control your hardware remotely with the thingSoC ESP32 board.
In this article, we will introduce you to controlling real world devices using the Blynk system.
Read temperature, humidity and air quality control using DHT22 and MQ - 135 and monitoring with Blynk using ESP8266.
I made remote control car. The motors are controlled by smartphone application Blynk and Pi Zero W with the I2C input motor driver.