I changed ordinary boring desk lamp into Blynk controlled device :)

It's smart... It's automatic... it's a humidifier... It's a Charizard!

A magnetic sensor sends notification to the phone when you forget to close the fridge door.

It is a simple project that helpful for the advanced level of farming and irrigation.

Here I have made prototype of smart home. In this Smart home project I have used Arduino and Node Mcu to control the Hardware parts.

My colleague crashed the roof of his car by leaving the garage to early. So I promised him red, amber, green lights in the garage.

Hii Friends Today I'll Show You How To Make Simple DIY Eclipse Wall Light Using ESP8266 SO LET'S Make It🔥

This project was part of the Lane Tech HS Physical Computing Lab course. I created this project as part of the Home Automation/IoT project.

This guide shows you how to add Blynk Board support to the Arduino IDE.

The best way to save electricity from using your light bulbs is to open your blinds and let the sun shine through!

How to make your room intelligent easily.

This is a second tutorial for making DIY automated driveway gates for relatively cheap using Arduino, ESP32, Raspberry Pi, and Blynk!

First step towards Home automation

Components Used *Arduino UNO *ESP8266 *Ultrasonic Sensor *LDR Module *5v-Relay(4-Qty) * Level Sensor *LM35

Make IoT-based Home Automation using ESP32 Google Assistant Blynk with timer, sensor, and IR remote control relay with real-time feedback.

A simple add-on to a regular door the provides automatic operation based on voice command, smartphone command or presence detection.

DIY room appliances control over the cloud

Learn how to use Blynk app with an ESP8266.

Home automation is a term used to describe the process of automating certain tasks and devices around the home.

I created a house with a light that gradually turns on a light if it is dark and an alarm connected to the door.

With this project you can play any sound from your SD card on your audio system. Only wire you will need is 3.5mm jack.

Simple project for motitoring internal - external home enviromental conditions, motion, fire detection and controling 4 appliences with app

An automatic pellet dispenser designed to feed your dog or cat without lifting a finger

Turn a light on/off using a relay, Blynk, and an IR Break Beam.