Stop the mold from spreading in your house or office with this simple device. Just put it into the moldy room and watch the humidity.
Use the Arduino101 Bluetooth wireless interface with the Blynk GUI Library for control of things directly from your phone or tablet!
A DIY version of the Tp-link HS100 smart plug implemented using Wemos D1 Mini and Relay shield.
Collecting multiple data from multiple sensors connected to the same 1-wire bus and monitoring them from the internet with Blynk.
Open, close and monitor a garage door opener with a smart phone using a Particle Photon and the Blynk application.
Have your eggs always perfectly boiled just as you like them. With this solution that is simple and customizable.
Feed your pets remotely or on a schedule using the idIoTware Shield.
Learn how to use Blynk app with an ESP8266.
It will start your water motor automatically and stop automatically. Also showing how much fill with water in cm.
A simple 4 channel design/program for monitoring orchid and plant moisture levels.
This project was part of the Lane Tech HS Physical Computing Lab course. I created this project as part of the Home Automation/IoT project.
Water is essential for life. Save water is saving Earth. So, why not use Blynk Board to save Earth?
A system for the blind which helps them walk through the street, as and also monitors their location and sends an SOS on button press.
Replace traditional radio control gear in a 3D Sets 3D-printed Jeep with a Wemos D1 mini, Blynk WiFi iPhone and Blynk local server-Rasp Pi.
Controlling a robot via WiFi, using Arduino and Blynk application.
This is a very simple project, were the main idea is to explore how to control servos via internet using NodeMCU and Blynk.
Create a beautiful home lamp that looks great and also is smart and customizable with BigClown kit. It is really easy to make.
Potentially open your garage door from anywhere in the world!
This system identifies footballer's skills, performance & moves that are difficult to identify during play or training.
How easy is to do the link between my Arduino Yun and one mobile using free soft Blynk.
Use a LattePanda and Blynk to make a simple but cool IoT control unit.
Using PSoC and LinkIt ONE send analog sensor values to Blynk and then, with the power of IFTTT control your smart devices based on the data!
An opensource 3D printed aquarium controller with IOT capabilities.
Protect your home from the flood with this simple device. It will send you the notification when there is some leak in a bathroom or kitchen