Hi! Everyone. This time I show you on how to control your home appliances using your voice.
Playback messages & white noise (amp & speaker), control Philips WiZ smart lights (via IFTTT), play tunes (via piezo), PIR movement sensor.
IoT-based Smart Home Automation using the new Blynk 2.0, ESP32 LDR & DHT11 sensor to control 8 relays from mobile, IR remote & switches.
A new way to connect sensors! Connect up to five sensors to the particle powered WiSor and obtain real-time data on your mobile phone!
You can control your home light or any appliances from anywhere and anyplace
If you have ever wondered how to get started in the IoT (Internet of Things) world, this is the tutorial for you!
It's smart... It's automatic... it's a humidifier... It's a Charizard!
A magnetic sensor sends notification to the phone when you forget to close the fridge door.
A clock and decorative RGB Led Matrix Colorduino Shield and NodeMCU v3 Board with i2C communication and Blynk for IOTable
This project was part of the Lane Tech HS Physical Computing Lab course. I created this project as part of the Home Automation/IoT project.
The idea is to basically monitor our rooms continuously and if no one is present in the room, the system will turn off the lights and fans.
study and observer environment with this rover
Here I have made prototype of smart home. In this Smart home project I have used Arduino and Node Mcu to control the Hardware parts.
Garage Door IOT Monitor and Controller, linked to Home Assistant using MQTT. Also, OTA updates make it so I don't need a ladder for updates.
Many projects like this involve requiring a WiFi shield, or a Bluetooth Module. However, thanks to Blynk, all that is still possible.
My colleague crashed the roof of his car by leaving the garage to early. So I promised him red, amber, green lights in the garage.
This guide shows you how to add Blynk Board support to the Arduino IDE.
How to make your room intelligent easily.
Main Door Security System with keypad and MLX90614. LEDs are operated by 3 modes (manually + IR + Blynk) & a water level indicator system.
First step towards Home automation
IOT application with MKR1000 and ENV shield just 2 components with them we can get (Temp, Lux, Hum, UV) values from everywhere
Components Used *Arduino UNO *ESP8266 *Ultrasonic Sensor *LDR Module *5v-Relay(4-Qty) * Level Sensor *LM35
A smart scarecrow on the field to keep a track of climatic condition. For need of irrigation/pesticides a drone will be sent to the field.
