Potentially open your garage door from anywhere in the world!
The simplest project in Arduino that one could learn is to control the on-board LED via Blynk app.
Get an extractor fan to automatically turn on when the humidity in the bathroom exceeded a certain level and then turn off again.
The idea is to upgrade my rover to be controlled by a Blynk app in my mobile. The Blynk is talking to my Arduino UNO using Bluetooth HC06.
How easy is to do the link between my Arduino Yun and one mobile using free soft Blynk.
Open, close and monitor a garage door opener with a smart phone using a Particle Photon and the Blynk application.
Control your favourite guitar effect using nothing but awesome guitar poses.
Setup a home temperature monitoring system on your phone within minutes! Literally just copy and paste!
In this tutorial we're going to learn how to use Blynk app & Arduino in order to control a lamp; the combination will be through USB serial.
Using an accelerometer, we detected angular acceleration. With this data we used a particle photon to notify the user via a Blynk dashboard.
Receive weather updates directly to your mobile device from your very own weather station! Astonishingly quick & easy build with ☒CHIPS.
I made Blynk controlled Car using Adafruit Feather 32u4 Bluefruit LE. I can easily using Blynk!
Monitor pressure, humidity, and temperature over WiFi with an AA battery-sized device.
Use the Arduino101 Bluetooth wireless interface with the Blynk GUI Library for control of things directly from your phone or tablet!
This is a very simple project, were the main idea is to explore how to control servos via internet using NodeMCU and Blynk.
I tried communicating between Wi-Fi devices using Blynk's Bridge widget!
Use Tracer MPPT (and others) controller's RS485 data link to generate cool statistics live on your phone.
This system sends alerts to your smartphone when there is movement in the house, also allows monitoring the temperature of the place.
A cool star decoration for Chritmas Trees powered by Arduino MKR1000
This is a project for measuring the AC current of a device plugged into the outlet and data feedback using Blynk with OTA.
Adjust your blinds from the comfort of your seat without having to go through the effort of standing up.
This is a cool IoT project for beginners using NodeMCU and Blynk app. Through this project, you can control 4 devices in your home.
In this project, I am going to demonstrate how you can make your own ON AIR station with the help of the idIoTware shield.
Using PSoC and LinkIt ONE send analog sensor values to Blynk and then, with the power of IFTTT control your smart devices based on the data!