This project is about an IoT setup for a TV RGB backlight that can be controlled by Blynk App.
Human detection Security System Using IOT
Simple yet effective
An automatic pellet dispenser designed to feed your dog or cat without lifting a finger
Turn a light on/off using a relay, Blynk, and an IR Break Beam.
In this post we will be going to look how to make your own CCTV using ESP32-CAM board. It will be cost lower than CCTV cameras. You can fix
Make use of Samsung Gear Blynk widget to control LED strip that can light up your room. Thanks to HARDWARIO IoT kit it's easy to make.
Home Automation NodeMcu ESP8266 | Arduino | Smartphone Controlled
Take care of your plant with automatic watering.
This project was part of the Lane Tech HS Physical Computing Lab course. I created this project as part of the Home Automation/IoT project.
It is a lamp or desk lamp that is controlled by your phone for when you need the light to get to your bed, but not once you are in bed.
Turn on a fan automatically with a Particle Photon using temperature sensing and the Blynk app.
How To make Simple Home Automation System
This tutorial is about making a temperature and humidity wifi node with Blynk.
Here I have made prototype of smart home. In this Smart home project I have used Arduino and Node Mcu to control the Hardware parts.
In this project, I'm using a Kortex A1 IoT-sensor microcontroller in order to monitor temperature/humidity/pressure/altitude via WiFi.
With this project you can play any sound from your SD card on your audio system. Only wire you will need is 3.5mm jack.
This project was part of the Lane Tech HS Physical Computing Lab course. I created this project as part of the Home Automation / IoT project
The device utilizes the Pyroelectric Infrared Sensor to automatically power down the electric power to the tools at the work bench if idle.
Stop the mold from spreading in your house or office with this simple device. Just put it into the moldy room and watch the humidity.
You will never have to find your light switch again in the night, just walk into your bathroom and lights are on.
Create a beautiful home lamp that looks great and also is smart and customizable with HARDWARIO IoT Kit. It is really easy to make.
By using your phone you can make is so that you can change your temperature of your old stick thermostat from anywhere.