No Blynk libraries for Bluz? No problem!
I made train controlled by Blynk and BLE board. I can easily using Blynk!!
This project shows how to connect a DHT11 sensor with a NodeMCU and check temperature/humidity.
Display sensor values (DHT11 in example) on the Smartphone using Blynk App.
Control your favourite guitar effect using nothing but awesome guitar poses.
Learn how to gain remote control of your DIY constructions with the easy to use Blynk interface.
Control your Home Lights using the Twitter platform.
How can scientists model and predict the formation of sink holes using IoT?
Monitor your living room temperature remotely using DHT-11, ESP8266 WiFi module, and Blynk.
Get water meter data sent to your mobile phone using Wi-Fi. Made with ATtiny85 + ESP8266-01 + Blynk.cc and AA batteries.
Neopixel LEDs are fitted behind the guitar pickups and illuminate with the rhythm of your strumming allowing for a custom and unique design.
Mars Rover that uses Arduino 101 for brains, BLE for communication, and the Blynk app for remote control.
In this project, we're going to make a keyless door lock system that uses a 4X4 keypad to enter the keys and a servo motor to open or close.
This walks you through the Blynk boar'd's firmware.
You will never have to find your light switch again in the night, just walk into your bathroom and lights are on.
Getting Started Guide for using Blynk with the Arduino IDE for controlling a small robot chassis using a Bluetooth phone or tablet.
You can feed fishes or collect water quality data from anywhere in the world using this drone boat.
Monitor weather and security remotely with Blynk and the CC32000 LaunchPad!
Control your LED on Arduino UNO using Blynk App.
How to make a functional application with Blynk and the Linkit Smart 7688 Duo board, with utility for home automation.
The ARMA IoT Shield is a breakout board for Arduino to make IoT projects quickly.
I work a lot in my garage or in the garden, so it happens pretty often that I just don't hear my doorbell. So I made a smart one.
Monitor pressure, humidity, and temperature over WiFi with an AA battery-sized device.
Collecting multiple data from multiple sensors connected to the same 1-wire bus and monitoring them from the internet with Blynk.