Make a simplified table trash bin and can.
LM35 data or temperature can be shown on phone from anywhere. An Example of how can we read data through the virtual pin.
Use a Mi Band 2/3 to switch ON/OFF devices like fan, light or anything else that comes to your mind.
Too lazy to get off the couch? "Alexa, turn on the lights."
Making a smart garage model from the toy building using XOD and Blynk.
I spent my last weekend creating an app for my router. System and network charts, stats, notifications, WiFi control, and more!
This project shows how to connect a DHT11 sensor with a NodeMCU and check temperature/humidity.
Learn how to use the Blynk app to automate your house.
Check in on a loved one instantly and have fun!
This is a simple project for those who want to make a relay module using one BC547 transistor.
A home automation project for light use with an ESP8266 and 5V relay.
In this project, we're going to make a keyless door lock system that uses a 4X4 keypad to enter the keys and a servo motor to open or close.
Octopod, a uniquely shaped full automation system that allows you to monitor your industry and keep security with AI and smart RFID locks.
In this tutorial, we will learn how to control an Arduino with the help of Blynk App and ESP8266 WiFi Module. This project is quite simple!
Get water meter data sent to your mobile phone using Wi-Fi. Made with ATtiny85 + ESP8266-01 + Blynk.cc and AA batteries.
In this I show you how to control LEDs using Blynk app In IoT platform.
Monitor the conditions (Hum, Temp, Soil Moisture & Light) in which your plant in growing & take necessary actions from anywhere, anytime.
A simple device that turns the lights on when the user approaches home.
Burn everything written in the Blynk terminal to an SD card in seconds, anywhere the user is located.
By using your phone you can make is so that you can change your temperature of your old stick thermostat from anywhere.
It is a lamp or desk lamp that is controlled by your phone for when you need the light to get to your bed, but not once you are in bed.
This project was part of the Lane Tech HS Physical Computing Lab course. I created this project as part of the Home Automation/IoT project.
This project was part of the Lane Tech HS Physical Computing. This project involves relays, and the app Blynk to control lights.
Adjust your blinds from the comfort of your seat without having to go through the effort of standing up.