Use the Blynk app to control the RGB LED, the onboard LED, and the LED expansion from your phone.
Create a shield of control with multiple sensors to create visual and sound notifications in case of danger.
The Waternator 293 is a simple device that regulates the water level in your Christmas tree base.
Use your Android/IoS phone or tablet to control your hardware remotely with the thingSoC ESP32 board.
In this project, we're going to make a keyless door lock system that uses a 4X4 keypad to enter the keys and a servo motor to open or close.
Control your robot from a Wi-Fi network using an ESP8266 Wemos D1, Arduino IDE and Blynk App!
Read temperature, humidity and air quality control using DHT22 and MQ - 135 and monitoring with Blynk using ESP8266.
Setup a home temperature monitoring system on your phone within minutes! Literally just copy and paste!
In this article, we will introduce you to controlling real world devices using the Blynk system.
Blynk app allows selection of a desired temperature. A space heater turns on once actual temperature drops below desired temperature.
A weather station based on ESP8266 +blynk
Anytime you want to visualize a precise place you just clic on the app and see due to this
Use a Mi Band 2/3 to switch ON/OFF devices like fan, light or anything else that comes to your mind.
A system that keeps you updated about the happenings of your house in your absence.The display is shown on your mobile.
I made remote control car. The motors are controlled by smartphone application Blynk and Pi Zero W with the I2C input motor driver.
A home automation and Internet of Things project using Arduino Mega 2560 and ESP32.
Analyse concrete, metal, wood structures for bends and angles and alerts if they have deviated from the original position.
Turn your plain light switch into an internet connected luxury item that will wow your friends and family.
Build a home automation system with a Blynk user interface, an alarm system, dimmable lights, timers, and remote controlled appliances.
This turns on a bathroom fan automatically when its humid.
Using Blynk and your own BLE dongle you can monitor your Smart electric drive EV.
This project brings a pre-IoT audio receiver up to speed using Blynk and a TI Launchpad to send IR signals through WiFi from an iPhone.
Control an external LED light from anywhere in the world using the ESP8266. The GPIO pin serves as an output source to the LED.
Get an extractor fan to automatically turn on when the humidity in the bathroom exceeded a certain level and then turn off again.
Clean your yard from your smartphone or preset a job for AYSE to follow!