Easy way to unlock and Lock door with Blynk app. Also, I will add code for to Lock & Unlock door by RFID and fingerprint sensor. 3 in 1.

Converting a common RC car to a Bluetooth car, using an Arduino 101 & controlling with a smartphone via Blynk app.

Adapt your home automation project from our March 2017 workshop to be controlled through BLE using the Blynk app on your phone.

Fidget Spinners are everywhere - one of the challenges is to get the fastest spinning and longest running Spinner...build a sensor!

An outdoor rover, capable of autonomous navigation (using GPS and sonar sensors) or controlled over WiFi.

This system identifies footballer's skills, performance & moves that are difficult to identify during play or training.

At my age you have to get up at night and get tired on the way to the bathroom. Using a PIR-Sensor to trigger light on!

This is an implementation of my infrared replicator project, where I show how to control almost any infrared appliance from the Internet.

A system that keeps you updated about the happenings of your house in your absence.The display is shown on your mobile.

Blynk app allows selection of a desired temperature. A space heater turns on once actual temperature drops below desired temperature.

Analyse concrete, metal, wood structures for bends and angles and alerts if they have deviated from the original position.

Control your robot from a Wi-Fi network using an ESP8266 Wemos D1, Arduino IDE and Blynk App!

This guide will demonstrate to beginners how to use Arduino 101 BLE (Bluetooth Low Energy) feature to control an LED from an Android mobile.

Potentially open your garage door from anywhere in the world!

Get an extractor fan to automatically turn on when the humidity in the bathroom exceeded a certain level and then turn off again.

I made Blynk controlled Car using Adafruit Feather 32u4 Bluefruit LE. I can easily using Blynk!

This is a project for measuring the AC current of a device plugged into the outlet and data feedback using Blynk with OTA.

No Blynk libraries for Bluz? No problem!

Make a simplified table trash bin and can.

Gutters to Gardens is a solar powered rain barrel for remotely or automatically activating a water distribution system for home garden beds.

Luminous ball, with clock and thermometer, controlled by Blynk.

Learn how to automate your home with XinaBox and Blynk with a simple demonstration of turning lights ON and OFF using the Blynk app button.

Too lazy to get off the couch? "Alexa, turn on the lights."

A motor bike can be switched on only when the helmet is worn and switching on the mobile app.