Get an extractor fan to automatically turn on when the humidity in the bathroom exceeded a certain level and then turn off again.
Smart Backpack helps you to avoid injuries caused by backpacks by alerting you about improper uses.
Control your home applications using Amazon Alexa.
Control an external LED light from anywhere in the world using the ESP8266. The GPIO pin serves as an output source to the LED.
Real-time visibility and control of water, Nitrogen-Phosphorus-Potassium - from any where an Internet of Things (IoT) based system.
This project was part of the Lane Tech HS Physical Computing Lab course. I created this project as part of the Home Automation/IoT project.
Display sensor values (DHT11 in example) on the Smartphone using Blynk App.
Learn how to gain remote control of your DIY constructions with the easy to use Blynk interface.
We will learn how to capture temperature data, upload it to internet with a NodeMCU and monitor it on a Smart device using a Blynk app.
In this I show you how to control LEDs using Blynk app In IoT platform.
Monitoring basement to make sure humidity does not rise too high and alert to check if dehumidifier bucket is full.
Burn everything written in the Blynk terminal to an SD card in seconds, anywhere the user is located.
You can feed fishes or collect water quality data from anywhere in the world using this drone boat.
Cloud connected, fully automated, smart indoor herb harvesting using Seeed Studio's Wio Terminal and Blynk app.
Controlling a robot via WiFi, using Arduino and Blynk application.
I made Blynk controlled Car using Adafruit Feather 32u4 Bluefruit LE. I can easily using Blynk!
How to (and not to) build your own home automation system.
In this project, we're going to make a keyless door lock system that uses a 4X4 keypad to enter the keys and a servo motor to open or close.
Control your favourite guitar effect using nothing but awesome guitar poses.
Get water meter data sent to your mobile phone using Wi-Fi. Made with ATtiny85 + ESP8266-01 + Blynk.cc and AA batteries.
Use Tracer MPPT (and others) controller's RS485 data link to generate cool statistics live on your phone.
Use the Blynk app to control the RGB LED, the onboard LED, and the LED expansion from your phone.
Getting Started Guide for using Blynk with the Arduino IDE for controlling a small robot chassis using a Bluetooth phone or tablet.
I work a lot in my garage or in the garden, so it happens pretty often that I just don't hear my doorbell. So I made a smart one.