Make your own GPS tracker that works without wifi using GSM/GPRS connectivity. We do also have SMS and call feature
Make IoT-based Smart Home Automation using Multiple ESP32 & NodeMCU network to control all the home appliances from the Switches & Blynk App
Make IoT-based Smart Home Automation using Multiple ESP32 NodeMCU ESP8266 networks to control all the home appliances with Blynk & Switches.
It is a lamp or desk lamp that is controlled by your phone for when you need the light to get to your bed, but not once you are in bed.
Simple yet effective
We will learn how to make a fire alarm system using NodeMCUESP8266. This IoT based project detects the nearby flame & informs us.
In this project, I am going to demonstrate how you can turn on/off LED on idIoTware shield with the help of Blynk app.
LM35 data or temperature can be shown on phone from anywhere. An Example of how can we read data through the virtual pin.
In this video I'm gong to show you how to make Esp8266 based IOT Car using your blynk IOT cloud platform
Here I have made prototype of smart home. In this Smart home project I have used Arduino and Node Mcu to control the Hardware parts.
A car that can be controlled from anywhere in the world over the internet.
Have you ever dreamed to turn on or off your Christmas tree lights with just your voice? if the answer is "yes", just read this article.
A motor bike can be switched on only when the helmet is worn and switching on the mobile app.
Check the temperature and humidity of your house, the outside conditions and the weather forecast for today from your phone!
Playback messages & white noise (amp & speaker), control Philips WiZ smart lights (via IFTTT), play tunes (via piezo), PIR movement sensor.
Home-automation system using 8 Node PCB & Blynk 2.0
A smartphone garage door remote and status sensor using Blynk and Photon.
A simple Internet of Things experiment, using an Arduino MKR1000 board to control two LEDs and monitor a potentiometer, via Blynk app.
How to make smart safety and health monitoring for construction workers, How to create a smart safety system
The device utilizes the Pyroelectric Infrared Sensor to automatically power down the electric power to the tools at the work bench if idle.
HealthEcos - An ecosystem for realtime monitoring of health data and detection of the symptoms related to COVID-19 and medication management
This WiFi module makes it convenient for the user to switch between two audio sources without the need to swap and insert the audio cables.
Lock your door from anywhere
We are going to build a simple IoT dog feeder that costs less than $30 and can be controlled remotely via an IoT software!