Level Monitor for extremely dusty environments or where other distance sensors don’t work.
A simple Power Meter you can use to measure 0-26V & up to 3.2A. Add to any project to monitor voltage, current, power and energy used.
This project was part of the Lane Tech HS Physical Computing Lab course. I created this project as part of the Home Automation/IoT project.
Let's make a little portable IoT weather station for under $20 using Arduino and the Blynk library!
An IoT smart mailbox for securely receiving parcels and getting notification on app without being present at home.
Clean your yard from your smartphone or preset a job for AYSE to follow!
If you want a NodeMCU device that could help you to control all your house electrical devices, then this will be your best guide
This is a project for measuring the AC current of a device plugged into the outlet and data feedback using Blynk with OTA.
We will learn how to capture temperature data, upload it to internet with a NodeMCU and monitor it on a Smart device using a Blynk app.
Remotely we control our home with MKR1000 and IOT of Blynk. We can manage the boiler, the 'anti-theft irrigation, open the Automatic Gate.
A weather station based on ESP8266 +blynk
Anytime you want to visualize a precise place you just clic on the app and see due to this
Get an extractor fan to automatically turn on when the humidity in the bathroom exceeded a certain level and then turn off again.
Protect your valuables with a puzzle!
This is a robot who can see, listen, talk, and move freely to help us do many activities, much like a friend.
Create your Blynk mobile app to monitor your garden and activate the irrigation.
How to (and not to) build your own home automation system.
I made LED EyeBall controlled by Blynk using Adafruit Feather 32u4 Bluefruit LE. I can easily using Blynk!!
In this simple tutorial, we will explore how to control a servo motor over the internet, using a smartphone.
Burn everything written in the Blynk terminal to an SD card in seconds, anywhere the user is located.
Replace traditional radio control gear in a 3D Sets 3D-printed Jeep with a Wemos D1 mini, Blynk WiFi iPhone and Blynk local server-Rasp Pi.
Use the Blynk app to control the RGB LED, the onboard LED, and the LED expansion from your phone.
Get notified on your smartphone/smartwatch when your mail is delivered and when it is collected. New version.
In this I show you how to control LEDs using Blynk app In IoT platform.
I made train controlled by Blynk and BLE board. I can easily using Blynk!!