Servo using blynk and NodeMCU

For now, you can control Servo with Blynk.

Led With Blynk In Easy Ways

This project is for beginner

Now you can control a LED from your smartphone easily

Control your lighting and other appliances from your smartphone using Blynk app and voice control using google assistant IFTT webhook.

How to Read Multiple Analog Values Using One Analog Pin

A simple home automation project allows you to control home appliance from anywhere. Blynk provides very good and attractive interface.

Make your own GPS tracker that works without wifi using GSM/GPRS connectivity. We do also have SMS and call feature

This is an iot based smart energy meter that I made it can monitor power, current, watt hour and unit energy consumed by the device

HealthEcos - An ecosystem for realtime monitoring of health data and detection of the symptoms related to COVID-19 and medication management

Hi guys it's me Rohan Barnwal welcome back with another project in this project I demonstrate you how to create notification based door bell

It is an IOT based door lock system which consists of a NodeMCU board. It is interfaced with a Sg90 which shows open and close of a door lock

Stay safe with the smart tag that reminds you to wear a face mask when you'll go outside and sanitize yourself upon returning home.

This Preventive measure reduces the spread of infection to a large extent. A Must Watch!

In this tutorial, we will learn how to interface Servo motor with the Raspberry pi module and operate it with the Blynk app. and This proje

Here I have made prototype of smart home. In this Smart home project I have used Arduino and Node Mcu to control the Hardware parts.

In this tutorial, I am going to show you how to read multiple analog values using only one analog input pin.

This project is about an IoT setup for a TV RGB backlight that can be controlled by Blynk App.

A simple project to receive message on NodeMCU through LoRa and display it on a Blynk app.

A project that combats anxiety, depression and uplifts one's day one compliment at a time.

You can easily water your plants using IOT with the Soil moisture sensor

This tutorial is about making a Smart Plug with ESP8266 & Blynk for anything you want to turn on or off automatically.

This tutorial is about making a temperature and humidity wifi node with Blynk.