In this project, we're going to make a keyless door lock system that uses a 4X4 keypad to enter the keys and a servo motor to open or close.
Monitor pressure, humidity, and temperature over WiFi with an AA battery-sized device.
Octopod, a uniquely shaped full automation system that allows you to monitor your industry and keep security with AI and smart RFID locks.
Waterman is a device in form of a box which will check the contamination level of water and also the availability of water in the pipeline.
A method in which waste management is automated. An innovative system that will help keep the city clean and healthy.
A smartphone garage door remote and status sensor using Blynk and Photon.
A simple Internet of Things experiment, using an Arduino MKR1000 board to control two LEDs and monitor a potentiometer, via Blynk app.
Automate your curtains and add safety to your room, using the Arduino 101, WIZ750SR and Blynk, along with sensors and actuators!
Calculate distance to a certain object using an ultrasonic sensor. It can be used for car distance alerts, security systems, etc.
Easy way to unlock and Lock door with Blynk app. Also, I will add code for to Lock & Unlock door by RFID and fingerprint sensor. 3 in 1.
In this tutorial, we will learn how to control an Arduino with the help of Blynk App and ESP8266 WiFi Module. This project is quite simple!
Monitor your living room temperature remotely using DHT-11, ESP8266 WiFi module, and Blynk.
Get water meter data sent to your mobile phone using Wi-Fi. Made with ATtiny85 + ESP8266-01 + Blynk.cc and AA batteries.
Control your robot from a Wi-Fi network using an ESP8266 Wemos D1, Arduino IDE and Blynk App!
The best way to NodeMCU GPS tracker Blynk app In IOT platform.
Use a $9 GSM module & the Hologram network to remotely control any Arduino with Blynk App.
Level Monitor for extremely dusty environments or where other distance sensors don’t work.
Say goodbye to ice cubes and automatically cool your pet's water dish.
Clean your yard from your smartphone or preset a job for AYSE to follow!
In this project, I'm using a Kortex A1 IoT-sensor microcontroller in order to monitor temperature/humidity/pressure/altitude via WiFi.
Today i show you how to interface DHT sensor Value in Blynk Apps use NodeMcu8266 .
In this I show you how to control LEDs using Blynk app In IoT platform.
A new way to connect sensors! Connect up to five sensors to the particle powered WiSor and obtain real-time data on your mobile phone!
BLYNK app based remote used to control a bot.