Home Assistant to control switches and monitor room and outdoor condition using Blynk and Google Assistant.
Gutters to Gardens is a solar powered rain barrel for remotely or automatically activating a water distribution system for home garden beds.
Using UIFlow and Blynk to complete the interaction experiment
Monitoring basement to make sure humidity does not rise too high and alert to check if dehumidifier bucket is full.
An economic FM radio with WiFi connectivity incorporating cloud and IoT practices.
A garage door and a climate sensor, which is connected to wifi. It sends phone notifications when the door opens or closes.
The easiest way to add WiFi control to your project!
The autonomous device will send the vehicle position to the android app with time and will show the location on google maps.
Save water, save energy and monitor water consumption with a smart faucet.
Sending The Data From The LoRa Modules To Blynk Servers Using Ai-Thinker LoRa Modules
Make an ESP01 Project using Blynk IFTTT to control a 2-channel relay module with the Google Assistant. (Circuit + Source Code)
This project turn disables the door lock for an authorised user by face detection.
Here's IoT project (Internet of Things) data monitor, without any Ethernet shield, ESP module or IoT board.
Easy way to unlock and Lock door with Blynk app. Also, I will add code for to Lock & Unlock door by RFID and fingerprint sensor. 3 in 1.
A solution to measure noise level and sound pollution in urban areas.
A method in which waste management is automated. An innovative system that will help keep the city clean and healthy.
Make your stupid coffee grinder smart with this IoT and weight-based coffee grinder modification.
Make an IoT-based Smart Home with Blynk 2.0 using ESP32 to control 8 home appliances with real-time feedback & No Wi-Fi control.
Converting a RC car to an IoT car with a Particle Photon and controlling it with the Blynk app.
Make your own GPS tracker that works without wifi using GSM/GPRS connectivity. We do also have SMS and call feature
Use of a Particle Argon to open/close a garage door with a Particle Xenon used as a mesh limit switch & smartphone control via Blynk app.
In this tutorial, we will learn how to interface Servo motor with the Raspberry pi module and operate it with the Blynk app. and This proje
Ultrasonic sensor using blynk
Check the temperature and humidity of your house, the outside conditions and the weather forecast for today from your phone!