Ever wanted your whole room to be lit in sync with the music? Or to be able to control it with your voice? Then this might be for you!

How to make IoT based Smart Home Automation Using Blynk & ESP32 to control an 8-channel relay module from the manual switch & smartphone.

DIY room appliances control over the cloud

Micro Gear Motor based small robot powered by a Wemos D32 Pro and controlled by Blynk app.

Card lock just like in the film

Hello everyone this is Rohan Barnwal here welcome back with another project as we all know that whole world is fighting with COVID19........

The aim of this project is to control and monitor our home appliances through the internet from anywhere in the world.

I bought a GE smart outlet because it was on sale @Lowes really cheap. Well their app stinks and its not HomeKit compatible. I fixed that!

In this post we will be going to look how to make your own CCTV using ESP32-CAM board. It will be cost lower than CCTV cameras. You can fix

In Manual Mode, control the relay module from Touch Switch & Blynk App. In Auto Mode, DHT11 & LDR will control the Relays Automatically.

LCD Display and LoT Blynk App of Temperature, Humidity and Smoke Sensors

In this IoT project, I have made a WiFi and IR remote control relay module using an ESP8266 (ESP01) and Arduino with Real-time Feedback.

How To make Simple Home Automation System

Overfreezing you fridge is not good for your food and power saving, with this fridge monitor, you will always know the temperature in there.

You will never have to find your light switch again in the night, just walk into your bathroom and lights are on.

I work a lot in my garage or in the garden, so it happens pretty often that I just don't hear my doorbell. So I made a smart one.

Stop the mold from spreading in your house or office with this simple device. Just put it into the moldy room and watch the humidity.

With this project you can play any sound from your SD card on your audio system. Only wire you will need is 3.5mm jack.

Make use of Samsung Gear Blynk widget to control LED strip that can light up your room. Thanks to HARDWARIO IoT kit it's easy to make.

Create a beautiful home lamp that looks great and also is smart and customizable with HARDWARIO IoT Kit. It is really easy to make.

Simple and easy build of Arpeture MC Mini at a fraction of cost!

Hii Friends Today I'll Show You How To Make Simple DIY Arc Reactor Using WemosD1 SO LET'S Make It🔥

Hii Friends Today I'll Show You How To Make Simple DIY Eclipse Wall Light Using ESP8266 SO LET'S Make It🔥

Temboo is very easy to automate the IoT with Arduno YUN, in combination with Blynk and Dropbox to store pictures. All is free and easy.