An RGB lamp in the NFL offseason and an NFL Indicator from preseason to Super Bowl to show when your favorite team is playing.
Create your Blynk mobile app to monitor your garden and activate the irrigation.
Display sensor values (DHT11 in example) on the Smartphone using Blynk App.
Collecting multiple data from multiple sensors connected to the same 1-wire bus and monitoring them from the internet with Blynk.
In this I show you how to control LEDs using Blynk app In IoT platform.
The best way to NodeMCU GPS tracker Blynk app In IOT platform.
In this simple tutorial, we will explore how to control a servo motor over the internet, using a smartphone.
A four-legged robot on roller skates.
Be the master, control everything with your smart phone.
An opensource 3D printed aquarium controller with IOT capabilities.
How to control Hubsan X4 from Android or iOS, easily!
Mars Rover that uses Arduino 101 for brains, BLE for communication, and the Blynk app for remote control.
Burn everything written in the Blynk terminal to an SD card in seconds, anywhere the user is located.
Monitor real power, voltage, current and power factor using the Sparkfun Blynk board and view live graphs in the Blynk App.
Add some sound FX to your electric fireplace!
Particle Photon circuit allowing the display of environmental conditions (light, temperature, humidity, pressure) using the Blynk app.
Controlling a robot via WiFi, using Arduino and Blynk application.
The Waternator 293 is a simple device that regulates the water level in your Christmas tree base.
Use your Android/IoS phone or tablet to control your hardware remotely with the thingSoC ESP32 board.
In this project, we're going to make a keyless door lock system that uses a 4X4 keypad to enter the keys and a servo motor to open or close.
In this article, we will introduce you to controlling real world devices using the Blynk system.
I made remote control car. The motors are controlled by smartphone application Blynk and Pi Zero W with the I2C input motor driver.
Getting Started Guide for using Blynk with the Arduino IDE for controlling a small robot chassis using a Bluetooth phone or tablet.
The ARMA IoT Shield is a breakout board for Arduino to make IoT projects quickly.