Particle Photon circuit allowing the display of environmental conditions (light, temperature, humidity, pressure) using the Blynk app.
A tutorial on how to use the most important element of blynk.
Monitor your living room temperature remotely using DHT-11, ESP8266 WiFi module, and Blynk.
A simple Power Meter you can use to measure 0-26V & up to 3.2A. Add to any project to monitor voltage, current, power and energy used.
Level Monitor for extremely dusty environments or where other distance sensors don’t work.
Concerned about IoT privacy on the cloud? Blynk offers an interesting option for improved security with a local server.
Be the master, control everything with your smart phone.
Replace traditional radio control gear in a 3D Sets 3D-printed Jeep with a Wemos D1 mini, Blynk WiFi iPhone and Blynk local server-Rasp Pi.
A home automation and Internet of Things project using Arduino Mega 2560 and ESP32.
In this simple tutorial, we will explore how to control a servo motor over the internet, using a smartphone.
A weather station based on ESP8266 +blynk
Anytime you want to visualize a precise place you just clic on the app and see due to this
Clean your yard from your smartphone or preset a job for AYSE to follow!
This is a project for measuring the AC current of a device plugged into the outlet and data feedback using Blynk with OTA.
A collection of labs for the Texas Instruments + UIUC workshop. Spin a servo from the cloud with an MSP432 and Blynk!
Mars Rover that uses Arduino 101 for brains, BLE for communication, and the Blynk app for remote control.
This project was part of the Lane Tech HS Physical Computing Lab course. I created this project as part of the Home Automation/IoT project.
This project shows how to connect a DHT11 sensor with a NodeMCU and check temperature/humidity.
How to make a smart greenhouse using Arduino and Node MCU for IoT
Control any high voltage (240V, 15A) load whilst monitoring two external sensors and current drawn by load. No additional PSU needed.
If you want a NodeMCU device that could help you to control all your house electrical devices, then this will be your best guide
Remotely we control our home with MKR1000 and IOT of Blynk. We can manage the boiler, the 'anti-theft irrigation, open the Automatic Gate.
Get an extractor fan to automatically turn on when the humidity in the bathroom exceeded a certain level and then turn off again.
This is a cool IoT project for beginners using NodeMCU and Blynk app. Through this project, you can control 4 devices in your home.
Control an external LED light from anywhere in the world using the ESP8266. The GPIO pin serves as an output source to the LED.