A home automation project for light use with an ESP8266 and 5V relay.
In this project, we're going to make a keyless door lock system that uses a 4X4 keypad to enter the keys and a servo motor to open or close.
Octopod, a uniquely shaped full automation system that allows you to monitor your industry and keep security with AI and smart RFID locks.
Easy way to unlock and Lock door with Blynk app. Also, I will add code for to Lock & Unlock door by RFID and fingerprint sensor. 3 in 1.
In this tutorial, we will learn how to control an Arduino with the help of Blynk App and ESP8266 WiFi Module. This project is quite simple!
Monitor your living room temperature remotely using DHT-11, ESP8266 WiFi module, and Blynk.
Get water meter data sent to your mobile phone using Wi-Fi. Made with ATtiny85 + ESP8266-01 + Blynk.cc and AA batteries.
Clean your yard from your smartphone or preset a job for AYSE to follow!
In this project, I'm using a Kortex A1 IoT-sensor microcontroller in order to monitor temperature/humidity/pressure/altitude via WiFi.
In this I show you how to control LEDs using Blynk app In IoT platform.
Get an extractor fan to automatically turn on when the humidity in the bathroom exceeded a certain level and then turn off again.
Monitor the conditions (Hum, Temp, Soil Moisture & Light) in which your plant in growing & take necessary actions from anywhere, anytime.
Gutters to Gardens is a solar powered rain barrel for remotely or automatically activating a water distribution system for home garden beds.
A simple device that turns the lights on when the user approaches home.
Burn everything written in the Blynk terminal to an SD card in seconds, anywhere the user is located.
Too lazy to walk and turn something on Want to cheaply control your home power usage while out Well here's a button (and app) to solve it!
By using your phone you can make is so that you can change your temperature of your old stick thermostat from anywhere.
An automatic pellet dispenser designed to feed your dog or cat without lifting a finger
It is a lamp or desk lamp that is controlled by your phone for when you need the light to get to your bed, but not once you are in bed.
This project was part of the Lane Tech HS Physical Computing Lab course. I created this project as part of the Home Automation/IoT project.
This project was part of the Lane Tech HS Physical Computing. This project involves relays, and the app Blynk to control lights.
Adjust your blinds from the comfort of your seat without having to go through the effort of standing up.
Turn on a fan automatically with a Particle Photon using temperature sensing and the Blynk app.