This project brings a pre-IoT audio receiver up to speed using Blynk and a TI Launchpad to send IR signals through WiFi from an iPhone.
A simple project to learn IoT by connecting a DHT11 temperature and humidity sensor with WeMos D1 Mini and interfacing the data to Blynk.
Use a Mi Band 2/3 to switch ON/OFF devices like fan, light or anything else that comes to your mind.
An IoT smart mailbox for securely receiving parcels and getting notification on app without being present at home.
Wanted to replace the standard remote control unit for a garage door with an app on my iPhone.
Create a shield of control with multiple sensors to create visual and sound notifications in case of danger.
Control and monitor your Arduino porject using your only a smartphone and an internet connection!
Build a home automation system with a Blynk user interface, an alarm system, dimmable lights, timers, and remote controlled appliances.
An IoT device that could help keep the Sandy River Delta clean, as garbage is a very common problem.
ADITI is a connected bodysuit heating enabled incubator for preterm infants measuring ECG, Heart Rate, SpO2, Temp & Respiration comfortably.
Let's make a little portable IoT weather station for under $20 using Arduino and the Blynk library!
In Manual Mode, control the relay module from Touch Switch & Blynk App. In Auto Mode, DHT11 & LDR will control the Relays Automatically.
Automate your curtains and add safety to your room, using the Arduino 101, WIZ750SR and Blynk, along with sensors and actuators!
A sense2goL pulse board is used to make a blind spot detector that can be mounted on the back of a bicycle to alert the rider from behind.
Control home appliances over internet. This IOT project done using Node MCU ESP8266 and BLYNK app. Control devices from anywhere.
Monitor your blood oxygen level with this ESP32 based Oximeter. This Oximeter costs less than 10$.
Solar installation with lithium battery packs monitoring.
A motor bike can be switched on only when the helmet is worn and switching on the mobile app.
I've made a few smoker controllers in the past and monitoring tools to go with them.
Single channel LoRaWAN gateway using Seeed studio Wio-E5 Module, ESP8266, And Blynk.
Monitor weather and security remotely with Blynk and the CC32000 LaunchPad!
Know when your clothes are dry
Your search for a big bedside clock has an end.
GrumpyHedgehog allows you to communicate with signs and movements to send keyboard commands, turn lights on/off, count people in a room...