This is a simple project for those who want to make a relay module using one BC547 transistor.
LM35 data or temperature can be shown on phone from anywhere. An Example of how can we read data through the virtual pin.
I spent my last weekend creating an app for my router. System and network charts, stats, notifications, WiFi control, and more!
This project was part of the Lane Tech HS Physical Computing Lab course. I created this project as part of the Home Automation/IoT project.
How to make your room intelligent easily.
Control your home applications using a mobile phone.
This guide shows you how to add Blynk Board support to the Arduino IDE.
Learn how to use the Blynk app to automate your house.
This is a cool IoT project for beginners using NodeMCU and Blynk app. Through this project, you can control 4 devices in your home.
A smart iot outlet controlled by Google assistant, learn how to connect blynk with ifttt
I created a house with a light that gradually turns on a light if it is dark and an alarm connected to the door.
Learn how to use Blynk app with an ESP8266.
The best way to save electricity from using your light bulbs is to open your blinds and let the sun shine through!
An automatic pellet dispenser designed to feed your dog or cat without lifting a finger
Overfreezing you fridge is not good for your food and power saving, with this fridge monitor, you will always know the temperature in there.
Turn a light on/off using a relay, Blynk, and an IR Break Beam.
Take care of your plant with automatic watering.
Turn on a fan automatically with a Particle Photon using temperature sensing and the Blynk app.
It is a lamp or desk lamp that is controlled by your phone for when you need the light to get to your bed, but not once you are in bed.
This project was part of the Lane Tech HS Physical Computing Lab course. I created this project as part of the Home Automation / IoT project
MovingLight is a moveable NeoPixel LED light with two stepper motors and is controlled via Bluetooth and Blynk app.
In this project, I'm using a Kortex A1 IoT-sensor microcontroller in order to monitor temperature/humidity/pressure/altitude via WiFi.
