Many IoT based Home Automation projects crashes when the Internet speed goes down. So, within this project, I tried to solve this issue.
Make IoT-based Smart Home Automation using Multiple ESP32 & NodeMCU network to control all the home appliances from the Switches & Blynk App
In the Lora IoT project tutorial, I have shown how to make the LoRa Arduino ESP8266 control relay from the Blynk IoT platform with feedback.
A smart iot outlet controlled by Google assistant, learn how to connect blynk with ifttt
I work a lot in my garage or in the garden, so it happens pretty often that I just don't hear my doorbell. So I made a smart one.
A smartphone garage door remote and status sensor using Blynk and Photon.
In this post we will be going to look how to make your own CCTV using ESP32-CAM board. It will be cost lower than CCTV cameras. You can fix
Adjust your blinds from the comfort of your seat without having to go through the effort of standing up.
Make an ESP01 Project using Blynk IFTTT to control a 2-channel relay module with the Google Assistant. (Circuit + Source Code)
Using UIFlow and Blynk to complete the interaction experiment
An economic FM radio with WiFi connectivity incorporating cloud and IoT practices.
A garage door and a climate sensor, which is connected to wifi. It sends phone notifications when the door opens or closes.
The autonomous device will send the vehicle position to the android app with time and will show the location on google maps.
Sending The Data From The LoRa Modules To Blynk Servers Using Ai-Thinker LoRa Modules
This project turn disables the door lock for an authorised user by face detection.
Make an IoT-based Smart Home with Blynk 2.0 using ESP32 to control 8 home appliances with real-time feedback & No Wi-Fi control.
Make your own GPS tracker that works without wifi using GSM/GPRS connectivity. We do also have SMS and call feature
Converting a RC car to an IoT car with a Particle Photon and controlling it with the Blynk app.
A solution to measure noise level and sound pollution in urban areas.
In this tutorial, we will learn how to interface Servo motor with the Raspberry pi module and operate it with the Blynk app. and This proje
Ultrasonic sensor using blynk
Make IoT-based Smart Home Automation using Multiple ESP32 NodeMCU ESP8266 networks to control all the home appliances with Blynk & Switches.
Check the temperature and humidity of your house, the outside conditions and the weather forecast for today from your phone!
The robot car is operating with Nodemcu esp32 controller and the command is given by the Blynk android application in a mobile phone using t