A DHT11 connected to Blynk to read data
This project shows the integration of hardware with mobile application. The user can control equipment from his phone over the internet.
Every time a movement is detected by the sensor, a message is sent to a smartphone anywhere in the world!
This battery charger monitor uses an OLED display & Blynk to show you its charge current, bus voltage, load voltage & elapsed time.
Neopixel LEDs are fitted behind the guitar pickups and illuminate with the rhythm of your strumming allowing for a custom and unique design.
This project creates a way to monitor water usage, to reduce water costs.
This project shows how to connect a DHT11 sensor with a NodeMCU and check temperature/humidity.
Simple GPS tracker using a Particle Photon (or Electron) and an EM406 GPS module with location visible on Blynk app map.
This project brings a pre-IoT audio receiver up to speed using Blynk and a TI Launchpad to send IR signals through WiFi from an iPhone.
Remotely we control our home with MKR1000 and IOT of Blynk. We can manage the boiler, the 'anti-theft irrigation, open the Automatic Gate.
A IoT system which helps you control your home lights from anywhere in the world in real time.
This is a unit to control a central heating system via 433MHz radio signals. Control of heating is via a Blynk app.
This NeoPixel LED light has six different light settings, is connected to the Wi-Fi and controlled via Particle Photon and Blynk app.
Making a smart garage model from the toy building using XOD and Blynk.
My colleague crashed the roof of his car by leaving the garage to early. So I promised him red, amber, green lights in the garage.
Wanted to replace the standard remote control unit for a garage door with an app on my iPhone.
A system that allows you to detect movement, send alert through your smartphone and turn on and off the lights of your home over internet!
Control and monitor your Arduino porject using your only a smartphone and an internet connection!
Use a Mi Band 2/3 to switch ON/OFF devices like fan, light or anything else that comes to your mind.
Build a home automation system with a Blynk user interface, an alarm system, dimmable lights, timers, and remote controlled appliances.
Control home appliances over internet. This IOT project done using Node MCU ESP8266 and BLYNK app. Control devices from anywhere.
Waterman is a device in form of a box which will check the contamination level of water and also the availability of water in the pipeline.
An IoT device that could help keep the Sandy River Delta clean, as garbage is a very common problem.
A simple project to learn IoT by connecting a DHT11 temperature and humidity sensor with WeMos D1 Mini and interfacing the data to Blynk.