A smartphone garage door remote and status sensor using Blynk and Photon.
Cheap and easy way to feed the dog from anywhere via your phone.
Protect your valuables with a puzzle!
In this opportunity we will integrate our active power meter or electric consumption, Peacefair Pzem-004 with the IoT Blynk app platform
A motor bike can be switched on only when the helmet is worn and switching on the mobile app.
Control your home applications using a mobile phone.
Read temperature, humidity and air quality control using DHT22 and MQ - 135 and monitoring with Blynk using ESP8266.
SuperWear is one-of-a-kind and seamless approach that enables an individual to utilize technology for healthcare and daily lifestyle.
LM35 data or temperature can be shown on phone from anywhere. An Example of how can we read data through the virtual pin.
It is a lamp or desk lamp that is controlled by your phone for when you need the light to get to your bed, but not once you are in bed.
A simple project to learn IoT by connecting a DHT11 temperature and humidity sensor with WeMos D1 Mini and interfacing the data to Blynk.
This product is designed to monitoring the quality of air continuously for COPD patient.
This project was part of the Lane Tech HS Physical Computing. This project involves relays, and the app Blynk to control lights.
Learn how to automate your home with XinaBox and Blynk with a simple demonstration of turning lights ON and OFF using the Blynk app button.
Here's IoT project (Internet of Things) data monitor, without any Ethernet shield, ESP module or IoT board.
This WiFi module makes it convenient for the user to switch between two audio sources without the need to swap and insert the audio cables.
Learn how to control AC electrical appliances conveniently using your voice, using XinaBox’s xChips, Blynk and Google Assistant.
A simple Internet of Things experiment, using an Arduino MKR1000 board to control two LEDs and monitor a potentiometer, via Blynk app.
This tutorial will help you to learn DHT11/DHT22 interfacing with nodeMCU and sending its data to Blynk Application.
The idea is to basically monitor our rooms continuously and if no one is present in the room, the system will turn off the lights and fans.
A smart iot outlet controlled by Google assistant, learn how to connect blynk with ifttt
In this project, I'm using a Kortex A1 IoT-sensor microcontroller in order to monitor temperature/humidity/pressure/altitude via WiFi.
How to make your room intelligent easily.
Display information or variables on a LCD available at BLYNK app using IOT.