An economic FM radio with WiFi connectivity incorporating cloud and IoT practices.
A garage door and a climate sensor, which is connected to wifi. It sends phone notifications when the door opens or closes.
The autonomous device will send the vehicle position to the android app with time and will show the location on google maps.
Save water, save energy and monitor water consumption with a smart faucet.
Sending The Data From The LoRa Modules To Blynk Servers Using Ai-Thinker LoRa Modules
Make an ESP01 Project using Blynk IFTTT to control a 2-channel relay module with the Google Assistant. (Circuit + Source Code)
This project turn disables the door lock for an authorised user by face detection.
A solution to measure noise level and sound pollution in urban areas.
A method in which waste management is automated. An innovative system that will help keep the city clean and healthy.
Converting a RC car to an IoT car with a Particle Photon and controlling it with the Blynk app.
Make an IoT-based Smart Home with Blynk 2.0 using ESP32 to control 8 home appliances with real-time feedback & No Wi-Fi control.
Make your own GPS tracker that works without wifi using GSM/GPRS connectivity. We do also have SMS and call feature
In this tutorial, we will learn how to interface Servo motor with the Raspberry pi module and operate it with the Blynk app. and This proje
Ultrasonic sensor using blynk
Check the temperature and humidity of your house, the outside conditions and the weather forecast for today from your phone!
A system for the blind which helps them walk through the street, as and also monitors their location and sends an SOS on button press.
In this project, I am going to demonstrate how you can turn on/off LED on idIoTware shield with the help of Blynk app.
The robot car is operating with Nodemcu esp32 controller and the command is given by the Blynk android application in a mobile phone using t
Monitor the conditions (Hum, Temp, Soil Moisture & Light) in which your plant in growing & take necessary actions from anywhere, anytime.
Make IoT-based Smart Home Automation using Multiple ESP32 NodeMCU ESP8266 networks to control all the home appliances with Blynk & Switches.
Make IoT-based Smart Home Automation Using Blynk & ESP32 to control an 8-channel relay module from the IR Remote, manual switch & Wi-Fi.
Collect environmental factors and culture amount while producing yogurt. Then, run a neural network model via Blynk to predict its texture.
Control temperature, humidity, CO2, and light with an automated open-source mushroom fruiting chamber using ESP32 and Blynk 2.0.
Perfect Smart Switches